What Have You Done To Your 3rd Gen Today?

O

How much did you pay for your CMC?

 

currently I am running 33s with 2.5 kings and viper cut with spidertrax 1.25 spacers and I barely hit the CM. I’m getting a CMC next month that is so aggressive you can run 35s and not hit the cab mount

 

I’m waiting to do the CMC when I upgrade to new wheels tires.. year or two.. I do off road a lot so running may be an issue.. damn may need wheels and tires sooner…

 

Hahahaha I shall find one!

 

That’s clean!!!

 

Yes! I tapped the ground from the drivers A-pillar. But my concern is that the wire for the dome is very thin. Not sure if it can handle the load of all the rock lights? I may use it just to trigger the relay. (Unfortunately that will make it just on and off)
It will still sense the key fob and come on automatically. but it won't fade on/off.
I'm still trying to figure that part out. But it will still function as courtesy lights.

 

And it begins. Been there and still there!!

 

I installed this unit inline with the DSIM module.
https://www.oznium.com/led-controllers/fade-in-fade-out

 

It was a freebie, I'm a welder
Me and a friend installed lift and did CMC at same time. I'm told $150 to $300 depending upon impact of COVID, supply chain issues, war in Ukraine and inflation in general!

Here's a pic with 285/75/16 showing viper cut and CMC w/Toytec lift...

 

this disturbs the ocd in me, the temperature should be 69 and the miles 69 as well

 

LOL! That is exactly what I was looking at on Amazon.

 

Pardon my ignorance (you should remember me from the shift knob )

What's the DSIM module?

 

Awesome on the free job being a welder. Truck looks great with the viper cut. I think that’s next in order for me. So true on the prices of everything now of days. Insane

 

I picked up the milwaukee rotary tool for the viper cut. i was always needing a rotary tool and the viper cut was the perfect excuse for a new tool.

 

https://dsimsolutions.com/pages/rock-light-harness-bundles

I used this and the fader to do my own take on footwell lights and puddle lights.

 

Tank is a discarded DC-9 crew oxygen bottle. Will hold over 3000 psi.
The system usually has 90-100 stored up. I wired in a 120 psi cut-off switch just to be sure I stayed with-in the limits of the bottle.

 

Next you'll ask for 6900 rpm!

 

You'll be happy with your choice of 6MT when you put on the 285s... unless you do the "gear hunting" on your own!

 

got it... thanks.

looks easy, but more $$$ than i need for two rock lights (acting as puddles).

 

Nothing fancy, just some wire cleanup.
Also, anyone have a AVS Smoke Bugflector II on a black tacoma? Need a pic to see if it looks good before I buy.