What Have You Done To Your 3rd Gen Today?

Haha. Tell me more about how you pay for people to install parts on your truck and how it probably has all kinds of ditch lights and headliner patches. Post pictures of your awesome Fuel wheels too when possible.

 

Hope that 50$ offer on that eBay hood sticker gets accepted and comes in soon so you can settle down.

 

You put your tailgate key in that or the actual fob?

 

After my shock relocate sitting in the garage for nearly 10 months I put myself and my new welder to the test this weekend. I’ve never done so much metal grinding in my life. And yes, the zip ties are temporary. Here’s to hoping the welds hold

 

Most people have the lights mounted so the bottom of the seat bottom facing down into the footwell. I have seat covers on my seat so those notches people use are covered up. This I used the Velcro option and attached the lamps directly to the carpet under the seat with the LEDs pointed towards the dashboard. Because of that I can physically see the LEDs when they’re in and I’m in my truck. It’s barely noticeable when they’re dim and I’m driving but it is more so when I have the doors open.

I’d much prefer not to be able to see the actual LEDs but with the nature of my truck I don’t have any better options.

 

One of the best things I've to the truck. It's a game changer. Just do it.

 

What improvements did you see?

 

Greatly improved throttle response and much better shift points are really the most notable things...everything just feels so smooth and responsive now. It really makes the truck drive like a different animal...like how it should have come from the factory.

Go take a look at this thread... https://www.tacomaworld.com/threads/kdmax-pro-tune-by-paparee-and-twtaco.713699/

 

Just a quick wash

 

You can never get it all until it's apart. ;-)

 

Anybody else have streaks IN their glass? It’s not on the outside or inside. It’s hard to see. Thinking it’s between the film they use to keep the windshield from shattering. It’s driving me nuts.

 

No ditch lights and just some cheap pro comp wheels that serve a purpose. You know you started this by chiming in on a conversation you weren’t even in, but it’s an open forum and we still have some freedoms here. In any case didn’t think you would be so sensitive over some harmless ribbing. I digress.

 

How’s the ride. Tell a big difference. I have same truck. Love the look.tks

 

Why did you make the change? Is it a better fit?

 

I just got a 22 manual last week, there is no slave master on the fender, at first glance, it looks like the slave runs from the brake master?

 

8 years at the Pentagon. 2 hours each way. Never again

 

I added the light blockers for the camera. Programed the Homelink. Added a dashcam.

All of the fund stuff comes in when the parts arrive from the parts department.

 

I can tell a huge difference considering I had a 2” spacer lift before hand. Had a bad vibration and terrible handling. With the new uca I got the correct alignment and the coils and new shocks are a nice compliment . I can’t say if that’s what fixed the vibration or replacing the needle bearing was the fix but either why I would highly recommend this setup. Feels like a whole new truck. The ride is more firm but in a great way. I feel in control of the vehicle. The steering is nice and tight.