What have you done to your Tacoma today? 1st Gen Edition

No, I actually took the window off of the red topper that’s in the post and am cutting the hole to size using the cardboard cutout on the jade green topper which I use on the taco now. Basically parting out the red to fix the green.

 

Final product. Front window swap done

 

ah lame, my hole is too large in comparison to our front windows for shells. Guess ill keep looking, thank you and good work!!!

 

Finally peeled off what remained of my OEM bedside stickers (turns out 20+ year rotten stickers suck to remove) and threw on some replacements

 

4 cyl or 6?

 

6

 

Sure looks good. I love that it still has the original graphics. What size tires are those?

 

31x10.5r15 (

$144 Thunderer Trac Grip - 31/10.50R15 127Q All Terrain Light Truck Tire

https://www.amazon.com/dp/B074Q2CGMK?ref=ppx_yo2_dt_b_product_details) but I think their tape measures might be a little off in Thailand, as I was getting in the truck after mount+balance it felt like my seat was nearly an inch higher than it was with the K02's these replaced.

 

@ss measurement? That's accurate

 

About as accurate as the measurements they're doing over at Thunderer , that is unless my K02's were so bald they were running about 30" (not out of the question). You're telling me you don't flop into the driver seat +/- .25" of the same path every time

 

Those things look beefy for 31's. That's crazy.

 

Maybe a bit of a favorable angle, I don't have a side shot but this one is a little further out I'm definitely happy with the way they look but they do make me want to see 33s on it even more than I did before...

 

Thunderers! Amazing tires. Outperformed my KM3 and worked great in the snow. 285/75/16 on vision D steelies. $128 per tire two years ago.

 

Harro! LoL!

 

Good to hear Are you still running them after those two years? I have heard all good things from what I could find about them online, I personally really like them so far and it's good to have another opinion.

 

I’m not running them now. I gave the KM3 a shot and plan on going back to the Thunderers. Solid tires! aggressive looking too.

 

Does anyone happen to know the part numbers for the plastic clips that hold the master air flow sensor cables and other looms onto the large rubber air intake connection that runs from the air box to the throttle body? I am using zip ties and it bothers me when I look at it. Even a point towards the right parts diagram would be helpful, the closest I've gotten is the "air cleaner assembly" diagram on the parts website but it doesn't show these little clips.

Would be forever grateful if anyone happens to know or can point in the right direction

 

I'm thinking I will run this set bald and then get them again in 33 if they are as good as I'm hoping (and if they stay cheap/available).

Here's some side shots... not as beefy looking but still not bad

 

Sexy! Look clean! I like our green taco’s versus the new army green. Classic look.