Stock Tacoma with 265/70/17 Pictures Please!

Is that Ray 10s, if so how much do they poke out?

 

I want to do this also. I have a 2014 double cab 4x4

 

I finally did it

 

Looks good! What’s the specs?

 

fox 2.0 shocks front and rear
Set on second notch… says 1” but I got 1.5 plus .5 taco lean top plate spacer on the left side.
Rear 1” block
Method 316 17x8.5 -0 offset
Toyo AT3 265/70/17 SL

front.. fender to ground 37 3/4
Rear .. 38 1/2

I wanted a little rake for when I haul stuff.

 

Go for it!! Just do some research if that's how much you want to lift. Sometimes I feel like I could've gone a little higher. But my little girls might have trouble getting in..lol

 

Falken Wildpeak AT/3's

They rub the front mud guards a bit on sharp turns. Minor surgery required.

 

Hey Y’all, new here.
2022 TRD Sport with stock suspension.
Wheels: KMC KM723 17X8.5 0mm offset
Tires: Falken Wildpeak AT3 265/70/17

No Rubbing.

 

Nice looking wheels . I have the 16” version .

 

Any side pics? Looks great

 

I have this question out as a separate thread so I an update in the future for all looking for the same set up but anyone on this thread running the Relations Race RR7 with a -12 offset experience any rubbing issues?


https://www.tacomaworld.com/threads/relations-race-wheels-rr7-owners.759046/#post-27061633

 

I have some Falken Wildpeak AT3 265/70/17's on SCS F5's -10 offset on stock suspension. I am getting some rubbing when backing up witht he wheel turned, and turning sharp on an incline.

Anyone know the best method to to get rid of the rubbing? Would taking a heat gun to the plastic in the wheel well work?

 

OEM headlights or aftermarket?

 

2015 DCLB TRD Sport (Pyrite Mica) with stock wheels and 265/70R17 Goodyear Duratracs. This was stock-ish. I installed a 3rd TRD Off Road suspension which raised the front about 3/4".



This is on 17x9 FN Six Shooters with the 265/70R17 Duratracs swapped from the stock wheels and same 3rd gen TRD OR suspension. I got a set of 5 for $150, couldn't pass that deal up!! I ended up using Bronze/Gold plasti-dip and they have held up for over 3yrs now. The wheels were black before I dipped them and had some chips in the paint. I really dislike black wheels since I want my wheels to stand out if I am going to spend good money on them (even though I got these cheap), literally 99 out 100 people have black wheels on their truck in my area and from more than 25ft away they all look pretty much the same. Not trying to dis anyone with black wheels. It looks good on some trucks and it's your choice...it's just not for me.

 

Thanks. I get a lot of complements on the wheels and tire combo. I think it looks good with the Blazing Blue paint.

Also was able to keep the front mud guards with some surgery. I know a lot of guys don't run them, but in case anyone does you can make them work.

 

Totally stock 17' TRD sport with Kelly Edge AT 265/70r17s. No rubbing anywhere lock to lock daily driving and offroad. My first upgrade on the long road to long travel. Lmao

 

Totally agree on the black wheels

 

I'm glad I'm not the only one!! lol The Subaru crowd is just as bad. On the Ascent forums everyone is like "look at my new wheels" and I'm just over here thinking...you spent how much just to get black wheels and look like like 80%+ of the other Ascents?? I don't know, I guess I just like my cars/trucks/motorcycles to stand out from the crowd and I like a bit of originality. I must be doing things wrong since I don't have 100k Instagram followers. lol Come to think of it, I don't know the last time I logged into that.