Brake light switch keep burning out

My 2007 Toyota Tacoma 2.7 keeps burning out brake light switch can anyone help & need color code for the brake light switch please

 

What do you mean color code? Check amp draw with switch depresses to see if you have a current leakage somewhere in the circuit.

 

Power flows from the Battery through the 10A Stop Fuse through the Green/White wire and into the Stop Light Switch. When the switch is press, power flows out through the Blue wire to the Stop Lights.

Good luck, hope you figure it out

Cheat sheet =
Green/White wire = Power In
Blue wire = Power Out

 

I posted it in your other thread, was it not correct?

 

Another one I missed huh?

 

I guess so lol.
Your wiring is the same you could snap a picture of your brake switch pigtail, I was gona post a picture of mine but it's different.

 

I could, but that would require me getting dressed and finding a flashlight.
Maybe we can settle for a pinout for now?
If OP needs an actual picture, I can try to get one tomorrow.

The plug is Blue if it has

1 = Blue
2. = Green/White

 

Well, I just noticed.
You posted that in the other thread.
It’s hard keeping up with 2 threads.

 

I posted the pinout of the switch, I couldn't find the connector pinout picture.

 

Pictures

https://www.tacomaworld.com/threads/brake-switch-broke.113187/#post-2168432