Colorado Trading Post

I might have some. Let me look

 

Careful you may run out of fuel on the way there

 

Too soon, bro.

 

Do you ever close this forum?

 

No, do you?

 

Yes but for other reasons

 

Does anyone need extra load bars for a Prinsu or similar? These are 47" long

 

bumped to the future.

 

I have these left over from my bilstein/ome lift. Never installed. Make me an offer.

 

i've got brand new still in packaging from toytec

 

Would either of these work on a 3rd gen?

 

Back in the early/mid 90s I did it twice in my full size Bronco running 33s and 4.56 gears. I think I was getting around 12 mpg.

Never once carried extra fuel and was totally fine.

 

I believe they work on all 05+ Tacomas. Part numbers appear to be the same for 2nd gen and 3rd gen.

 

Anyone need a couple of the standard OEM bed tie downs? Got four that I don’t use. Free.99

 

Throwing this back in the feed

 

The "D rings" if so I'd like to have them.

Edit: found some D rings - so pass on your product. GL.

 

Anyone have a set of 14” 650# springs laying around before I order new?

Also looking for some UCAs so I can upgrade the stock ones at the same time I put on the Icon 2.5s. Probably about 4-6 weeks from install, minimum.

 

Wanted, one 16inch Tacoma wheel as pictured. Or if others are looking for the same, there is a set of 4 available locally we can split up

 

Ran the White Rim in Dec. with 2 other Taco's and did not need any extra fuel. Filled up at the station at the turnoff to 313 and still had over a 1/4 when we returned. I did carry an extra 5 gal. in case but never used it for any of us.