1st Gen Lunchtable Thread - General Discussion

yeeshh im sorry to hear that my dude, always something on your plate it seems. Well i guess if mine shits the bed like that ill wack it and pray she gets me to a store then!!

 

Yeah the teeth I could see on the flywheel looked fine. Had to pull the inspection plate off that I installed like a week or two ago.

 

I feel like all I do is complain about my shitty trucks on here. But it’s just been a rough 2 years. Some of that is my own doing by buying a thrashed ranch truck.

Hammer method seems to work 99% of the time to get you home.

 

Ranch trucks really get beat more than any other type of vehicle.

Don't look at it as complaining; all of us here at one point or another exhibit our frustration with something. That's when others chime in with an alternative solution to something you may have overlooked.

You're keeping a truck on the road and that's a hell of a lot better than having it turned to scrap.

 

https://youtu.be/8hAZUGuRF5M

 

right now I need Gatorade Gary

 

I look like a good boy though, Barry

 

If I had to pick, even though I don't prefer tequila I'd have to pick Tequila Cat because he probably comes with tacos

 

Here's one small complaint; I'm missing some bolts for my bumper on the LC.

I have 4 total out of 6 needed M10 x 1.25 bolts.

I have 4 total out of 6 needed M12 x 1.25 bolts.

All OEM bolts (M10 and M12) work in each of the welded nuts.

I went out and bought new stainless bolts, M10 and M12, in the same 1.25 pitch, to replace not only the OEM bolts, but so that I have all 12 needed.

All OEM bolts removed have clean threads. They also work if I swap them to different weld nuts, ensuring the nuts too are clean.

A storm was coming and it suddenly started raining hard but for a moment, I couldn't get all the new hardware to thread into the welded nuts. I'd hate to mix and match but I may have to.

What's a good tool to chase and clean the threads on these weld nuts so I can use the new hardware in all the welded nuts?

 

As long as it keeps all the tequila to itself

 

there is a stark difference between good tequila and bad tequila, good tequila goes down like water. Bad tequila goes down and comes up like the fires from hell

 

Walter

 

yo I'd love a good tequila and lime right now

 

Would normally be my choice but not in the aftermath of last night lol

 

Too many bad experiences with it

only one actually, but that was enough

 

No they’re pretty reliable. They’re either Allison or Voight. We run Cummins ISL and ISX. Our axles and suspension are ZF.

It’s the bus bodies that aren’t the greatest.

 

https://youtu.be/MLEOdqiylC0

 

https://youtu.be/iZ8nN6hTnmM

 

Oh man I don't miss that part!