What Have You Done To Your 3rd Gen Today?

got the coastal offroad bumper welded up, off for box liner coating next.

 

Installed AFE Mach force 3” cat back exhaust. I will powder coat the tip myself. Was cheaper to purchase with chrome. Has a nice deep tone to it.

 

I just installed the Eibach 2.0 adjustable coilovers last weekend (another option if the TRD kit isnt available). The ride is firmer but really liking it so far. Now I get to do the ECGS bushing this weekend.

 

This is what I was referring too! I thought I had quoted my bad. I have the same set up but with JL audio amp.

 

Nice link, good to know for future reference.

 

Mine went on in February (w/ecgs), I have been really happy with them. After you swap the bushing you’ll probably want about 1/4” extra on Drivers side and it will be perfectly level side to side. I believe it’s about 8 turns IIRC. I kept adjusting until I liked it then measured the change (same height difference a 1/4” spacer would provide). They ride nice on my truck and have a winch and BA slimline bumper light bar etc.

 

Thank you!

 

I'm not looking forward to the ECGS bushing. Did your front settle any after a few hundred miles? I havent really noticed any taco lean yet, been driving the wifes car for work. I did order 1 inch blocks for the rear, also to be installed this weekend. Decided that I didnt want to go AAL since I'm not towing or hauling any heavy loads.

 

You could always go with a 3 leaf progressive AAL where you can remove the overload leafs (since you’re not towing), still have an inch or so of lift and excellent articulation.

 

Yep that’s what I did as well, had to cut down my Allen wrench to fit in and all is well!

 

After I got my super bumps installed got a Taco garage DMM installed , I had a hondo vent mount and that thing was solid but this gives me a little more choices.

 

Got that bakflip

 

Belated, but the other day I put in this prototype MagSafe charging mount from @FreshMexicanTaco Also swapped out the older plastic arm for one of the slick new aluminum ones. Highly recommend both! I posted more details in the main Taco Garage thread. Today I used it on a longer drive (3hrs) and having the magnetic mounting was so nice for when I needed to grab my phone quickly to make faceID work instead of having to fumble to put my passcode in.



Yesterday I finally got around to installing a Bakflip MX4 (buddies, @roboturner!) that I picked up for cheap way back in October or so. The weather has just been too miserable to put it on till now. Pics of that one later!

 

XK Glow 48"

 

How you get to the spare?

 

Not TRD Pro, but the AlphaRex Pro Series in Alpha Black. Gave them to my cousin for his 2016 OR DCLB in that awesome Quicksand Color.

 

These are the Alpha Black color. I can snap some pictures tomorrow!

 

Poly core support bushings and put gas in it, pretty big spender.
Pulling the front diff this weekend so my buddies shop can put my locker in next week so stoked for that (finally)

 

OH NOOOOOOO, NOT A REAR BLOCK!!!!!

 

Took off my roof rack to swap hardware to stainless and saw the beginning stages of rust spotting. So now I have a line-x roof top!