What Have You Done To Your 3rd Gen Today?

if you look at the pictures closely it looks like a car was turning left in front of him and he swerved to avoid it. So from these pictures, it looks like the guy had three choices plow into the black car plow head-on into the FJ thread the needle between the FJ and the Tacoma, and pray to God that the Tacoma driver saw the situation and moved over. It appears he made the right decision

 

I have 2 Caliraised lights and they work great for me! I have the behind the grill 30 inch bar and then the one up top. I have the dual function switch from Caliraised and I’m not super pleased with the switch itself. I’ve reached out to them for a little support to see if I have a faulty switch. I cannot run just the white light by itself and it’s wired as instructed. Also, the back lighting is always on which isn’t something I want. The other switch from them is only illuminated when the light bar is on and that’s what I was looking for.

 

Woodinville WA

 

Had my broken wheel stud replaced and brakes re-bled.

Nice of the shop I went to to not nickel and dime me. Just charged an hour labor for the whole thing and nothing for the (what would be) cheap replacement stud.

 

Had some parts laying around.

used kmorgan3 ect pigtail harness wired to the led. Comes on with dash lights.

My own baby version of oostroma cup holder kit.


Edit: I drilled a bunch of little holes in the cup holder insert to let some light shine through

 

Still alittle cool in NY today so having my ss3’s put in replacing my driving lights photos later on in the day

 

i did grab it with both hands and tug it like i was stealing it and it shook the whole front end so that makes me feel good

 

Looks good.
I thought of adding extra holes in my holder but my spouse is not keen on the additional illumination so it didn't happen.

 

Yeah, I tried it with no holes first, it was good but wanted just a bit more due to wear the diode was placed.


both sides*

 

Curt harness ran power wire to battery used 1/4 loom think I attached to brake line going up to engine. Zip tied. Don't cover the hole to the spare unless you used the mounting brackets which you can pop it in and out of.
Curt
56349

 

Love them. Their pre-sales and post-sales support is amazing, and the racks are fantastic; can't recommend them enough.

 

Washed 'er up! I had to clean off the Herky-Huffman trip I took last week, had that white crushed rock dust/slush everywhere. Water/vinegar spray cleaned all interior windows, door pillars, wheels, etc. Gosh, I got a 2" OME Medium lift kit 1.5 months ago, and now look at this! What are my options to level this out? I'm not happy with the front end lower than rear, I'd like to raise the front to meet the rear.

 

Finally got my lift installed:

285/70/17 Toyo Open Country AT IIIs
Method MR 703s with 0 offset (17 x 8.5)
Westcott lift kit (2” up front and 1” in back)
N-Fab Podium Nerf Side Step Bars

 

4WP bed stiffeners went in today, i think they'll hold up well.


Also got the bike mount set and ready for its maiden voyage today

 

So… I don’t actually want to do this but was wondering how hard/easy it would be to switch the led drl on the oem led lights to the amber turn, and have the drl function as an amber drl. Asking for a friend.

 

That was an older pic. I swapped out the grilles. I've been trying different colors until I succumb to the "Heritage Grille".

 

I’ve wondered what that process would be like myself… interested to see if a member here has done it?

 

Thanks. They are 265/75 R16, so 31's I believe. The front should settle more once I get the bumper and winch on there.

 

Those are 32’s.

 

@TacoManOne Updated me to KDMax PRO+ normal yesterday. I had PRO normal previously and this one really matched the way I drive. Thanks @TacoManOne. Sorry No Pic...Just Imagine a much better driving Taco...