What Have You Done To Your 3rd Gen Today?

Got some raptor lights installed with the TRD wiring harness all from Running4Tacos. One day I'll get the full LEDs and get the wiring harness from FBC but that will down the road. Next upgraded will be 17" TRD Rims and some KO2s

 

Hey!

It was a pleasure meeting with you and getting to happiness for both of us. I am totally glad that you are liking it and wo be stoked to meet u with you for some camping down the road.

 

That’s why I went with the 3 leaf pack. Some of the leaf packs can be confusing. A reputable company will specify each or pair. Plus a complete leaf pack is much more expensive than a progressive leaf pack because you’re replacing the entire leaf assembly.

 

Wait... We can drive to Vegas?!

 

Looks good. Looks to be just a little to high so maybe some adjustable height mounting feet would help. Something like these from Sherpa might work, there are also other types available out there.
https://sherpaequipmentco.com/products/adjustable-track-mounting-feet

 

Need to ask @daveeasa. I'd also like to know if it possible.

 

Bed stiffened. Also finished the diy pressurized water tank.

 

Yeah, and might as well throw in a switch to toggle between them.

 

Cv axle delete to save gas

 

@Puppypunter, @kmorgan3 and I have discussed this one. MESO pulled it off (check his build thread) but didn’t describe how, I assume he modified the logic board. It does not appear possible (or at least it’s not easy) to trick the assembly into an amber DRL without opening it. Constant signal to the turn provides a single flash and then off. A high frequency to the turn still flashes which looks like hazards rather than DRL.

But, in the interest of knowing more, I upgraded my bench test light to a non crashed model and sent the crashed one to Kyle to tinker with in his lab. Since it’s already open and it was pretty cheap, I figure it’ll be a good sacrificial lamb.

If there is an easy way, it might be something @no vtec 4me could incorporate into his custom work with these.

So, Kevin’s custom OEM LED thread might be the best spot to camp out for news on this topic. I suspect a fair number of people would be interested.

I kind of like white for DRL myself with amber exclusively for turns.

Mostly what I want to customize on these headlights are the “TRD” and “PRO” pieces to dual TRD and black, I think a 3D print could work there, but it would take some tinkering to get just right. Better still would be a polymer with integrated resistive heat which could melt snow, but that would mean two extra wires and a tap into the mirror heat circuit.

 

Absolutely forgot to post the bed light kit install. Makes it super nice to work inside the bed with the cover on.

 

Had a productive weekend..
- Prinsu Cab Rack
- Black Tailgate Inserts/Emblems
- TRD Pro Tail Lights

 

Looking really good!

 

Thank you!!

 

Thanks brother

 

My ladies usually want the lights off when I'm working inside the bed with the covers on.

 

Those look great! It appear to be around a 1/4 inch too high. I will dig around and see what I can find. Those for sure look like they’d work. Thanks for the link for those.

 

Truck looks great. What light are you thinking about running on the rack? I went with the 43 inch Caliraised dual function light bar and it sits above the rack so, eventually I’ll be switching it out for something a little slimmer.

 

Thank you sir! How do you like that Cali? I was thinking about getting their slim light bar..

 

Did this yesterday:


Really appreciate everyone on this forum for their help and information. 10k down and 200k more to go.