1st Gen Lunchtable Thread - General Discussion

Hahaha

If anyone from the LT makes a few episodes of TV it'll probably be Cops or Judge Judy

 

I’ve been on the outdoor channel

 

As soon as I get my tundras bumper finished I can swap the stock Lucas back onto my 4 runner

 

https://www.lceperformance.com/5VZ-Lightweight-Crankshaft-Pulley-p/1016101.htm
Pretty sure this didn't exist until recently.

 

i have one.. they've redesigned it.. but even that was like 5 years ago

 

You still haven't finished it?

 

We have a sick kiddo on our hands so I get to work from home today.

Who knows? I might actually get some things done!

 

https://www.instagram.com/p/Cby11HWrx0H/

 

To bad your neither

 

Even better

 

That's how I got started, I still keep that shitty flux core machine around just in case.

 

It's funny because that's how I planned to have started but I can't say no to free school!

What welder is it that you bought?

 

I just went to HF one day and walked out with the old 90A no gas flux core machine that only has high and low power setting haha

Now I have a Lincoln 140HD in my shop

 

Any of you guys on here have a filtered water tap in your kitchen, feel like I should install on with the majority of my pipes being old galvanized units still.

 

Just get a under the sink setup. Looks better and works better

 

But for 20$ this one isn’t bad, what my parents have

 

Those are what I was looking at, but there are so many and lots of no-name brands out there now

 

Brita has theirs, and i feel you cant go wrong with a brita

Brita Total 360 BRDROS Undersink Reverse Osmosis Water Filtration System with Brushed Nickel Faucet, Blue

$259 Brita Total 360 BRDROS Undersink Reverse Osmosis Water Filtration System with Brushed Nickel Faucet, Blue

https://www.amazon.com/dp/B08654D49X

 

@Speedytech7 they are all the same, its just making sure if you buy a no name it will accept a brand name filter. Most those no name usually copy a design and will accept good filters.

or get a setup that accepts cartridge, because then you just match the size and buy what ever you want (which is the route i would take) and what we normally use on are big ice machines at work