6 inch lift without cutting

I wanted to know if there is any way I can get a 5 or 6 inch lift without cutting anything. I don’t do off-roading or go ride in mud. I have a 2015 Prerunner.

 

4" spindle lift, 2" adjustable coil over.

But the burning question is why?

 

Would they need to cut if I ended up doing that?

 

Prerunner
Not off-roading

6” lift

lol

 

6” body lift /thread

 

This is your answer.

 

I answered what you asked originally, which was a no cut solution.

Some simple Google research on how these parts work and you'll get it.

Cutting is typically a drop bracket lift. You're doing well to try and avoid that.

But you also avoided answering 'why?'

 

I'm pretty sure the only reason for cutting the stock cross member when doing any 6" drop bracket lift is to make room for the front driveshaft. You don't have one so I doubt you'd have to cut it.

 

Thanks for the solution. New to everything and wanted to lift my truck in that general range.

 

Do you know how much something like that would cost by chance

 

Google: Tacoma spindle lift kit

 

I assume you’d get 4 right? Sorry for questions but I’m not knowledgeable with this type of stuff

 

The rear doesnt have spindles to replace.

As far as costs, you can do your own shopping.

 

You can put a drop bracket lift on a pre runner with no cutting if you want. You only cut the frame on a 4wd

 

So will it basically squat my truck if I get the 4” spindle lift and 2” adjustable coil over?

 

Yeah you'll need to add a shackle flip lift, blocks, or a new leaf pack to lift the rear

 

Say I were to do the two previous things to the front, would a 4 inch block make it level or do I need to go less?

 

3" suspension lift and 2" body lift. Will out perform any crappy bracket drop lift.

 

4" block ought to make you level or with just a little rake since the truck should sit about an inch higher in the rear stock