MESO X MORIMOTO Full LED Tail lights

Awesome thank you! I like the sequential better. Mine came wired as normal. So swapped and now good to go. Thank you for the quick reply!

 

It self connects to one or the other for sequential blinkers or regular, already attached is sequential

 

Follow Up question. Is this line normal? It’s in both my lights so figured it might be,

 

Yes it is

 

Final product. Pretty happy camper. Can’t wait to use the backup lights!

 

Anybody else missing a metal clip nut thing? Also have one broken tab but not as big of a deal. Sent a support email with pictures but no reply yet. Thought about taking one off the old lights but want to sell the take offs.

 

One of my metal clips was stripped or something. Screw kept Turing so had to use some locktite. Hope it works.

 

Use one from your old lights until you get a new clip. At least you can run your lights. When new clip comes in replace it or just put on your OEM to sell.

 

Some others will probably say its a bad idea but whenever I have had condensation inside a tail light or headlight I removed it and completely sealed it with heavy duty sealant like ultra copper or right stuff.

I had OEM fox body headlights (6 pieces) that would always fog up. I removed them, waited for them to dry thoroughly, sealed them and reinstalled. No issues after that.

 

The pamphlet said that’s “normal” lol. I wonder if these were really worth $650 bucks. Time shall tell all.

 

Fogging condensation is normal for even OEM headlights and taillights. Puddles of water is not. None are 100% air tight pressure sealed, if they were, as Meso said:

 

Lol. Exactly. Meso said.

 

I just got mine from you guys today! They were supposed be here Thursday but was delayed due to the weather. Thanks again!

 

I'm selling my 2022 sr5 taillights for $100 + shipping. Probably could get more for them but pre sold them while waiting on my meso tails and now I can just put them right back in the meso box and ship them out

 

Yeah it looks like they just reused the internals of the meso tacoma tails and put them in a bigger tundra housing. The bars need to be bigger on a bigger truck. Also, like you said, the bars do not look right it looks slanted to me

 

Delayed during shipping due to the storm the other day but they showed up today! No broken tabs or condensation. Extremely happy with yet another top notch @MESO product. Thank you!

 

Not the best picture at all but I got them installed. Personally don't really like the look of sequential turn signals so I have them on not-sequential(I'm not sure what else to call it). Can't wait until night so I can get a good look at them for real.

 

Yeah, if the moisture is pooling up, it's most likely an issue with the seal (as long as the wiring in the back is all seated properly). I only had the issue in the driver side housing, and the passenger side housing remained dry. If it were normal condensation, I would expect it in both housings...

 

Regarding it looking slanted, I think it is because is goes straight down, not following any of the lines. So it gives an illusion that is slanting inwards, and is very obvious on the Tundra.

This slant was what I first noticed on the Tacoma's version during the initial reveal. It goes straight down, but the rounded shape of the lens gives it a very slight illusion of a slant. This falls under "once you see it, you can never unsee it" for me.

I have my clears now, and I love them. From every angle, they look amazing in person. I think pictures really do not do it justice. The "slant" is really only visible during the day with the brakes on, standing directly behind the truck.

 

Red Lenses look amazing on Voodoo Blue.