Show me the best looking rims 1st gens!!

What kind of rear bumper? Custom?

 

Man I really want to get those TRD wheels. Still not sure if I should do bronze or gray.

 

Twenty year old American Racing aluminum with no clear coat.

 

yeah custom, check out my thread for the build

 

These babies are brand spanking new. Went for the old skool look with the white lettering facing out.

 

Old progressive rims from the 90s, a little beat, but I like the look

 

I like my method 304s.

 

15” MethOD Double Standards. 15x8 3.5BS

They stick out really far

 

Those look great! I have been trying to find these rims for a while now but settled on 3rd gen T4R 5 stars. Do those Tundra rims rub at all or are you running spacers? Is the backspacing equal to 1st gen stockers?

 

When the clear coat fails, you can strip it and polish the aluminum rings with mothers.

 

Hey all. I need some help. 2001 tacoma 4x4

So I like these wheels, however, they only
come in a 17x9 -25 offset. I have a bilstein 5100 level. I plan on running 265/70/17.

my question is, would this be okay? I don’t believe it will rub the upper control arm, but can someone guide me if I’m about to
Make a mistake? Will this damage my truck? Like wheel bearings? Are these too much offset? I don’t mind trimming a little. I want the wheels to stick out a little. Thoughts? Any help is appreciated.

 

Well I run a 17x 9x -38.
I had to trim the pinch weld and some of my lower fender but I'm running a larger tire.
Anything other thank a stock size tire, rim and offset will cause increased wear. It doesn't seem to be as much of a issue with tacomas.
There are tire rim calculators out there that will show you how the offset will look .

Here you go.

 

Do you have the manual hubs on this truck?

 

Double Cab, all stock except rims (have the original). Only 34,000 miles. I did the timing belt, hoses etc. once, just because of age. Too many vehicles...Never came out in rain in almost 13 years.

 

I have the same rims on my truck. They are the same specs as the original rims to this truck.

 

Here are some
MO962 bolt pattern 6-1397.
Yok Geolander M/T G003 LT275 /65 R18
There a little big, personally I would go with a R17 or R16 next time

 

How 'bout some shiny original Toyota stainless-steel hubcaps!

Happy Motoring, Mark D.

 

Nittos on Method Bead Grip wheels