OME dakars help

I just installed the dakars on my 2015 and I had a noticeable bro lean. I added a 1/2 inch HS shim and still the rear is 1/2 inch lower than the front. So, my question is, should I remove the 1/2 shim and add a 1 inch block? Or do guys know of some better options to get 1/2 inch with the shim or a full inch without it?

 

Its probably not in the rear suspension. Id remove any blocks or shims from your rear suspension. What is your front suspension? Pics? probably need to lower that down to level or 1/2 inch below the measurement of the rear

 

I don't really want to lower the front. I have Maxtrac spindles lift and OME 883 with Bilsteins. So, the front should be around 5.5 inch of lift, more or less.

 

I dont know much about prerunner stuff, but for 4x4 thats way too much lift. Either add a block, or get different leaf springs that match your front lift. Or just rock the bro lean. The Dakars are good for about 2.25-2.75" of lift.

It seems you bought the incorrect leafs for the type of lift that you have.