What Have You Done To Your 3rd Gen Today?

Can you back the camera away and take another picture. Its hard to tell what your looking at and what you mean please.

 

clip your fingernails and get help with the headrests. It’s not too bad tbh

 

Do the same with both air filters and I'd scratch the date & miles into the paint on the spin-on oil filters.

 

Had the third brake light fix done today.


Really happy with the service from the dealership. I asked if they would check my ECU and add any updates that were available. They did and updated it with the transmission fix for free. They also washed the truck. Don't know if that's normal service, but, I'm stoked. The truck drives so much better now. It was instantly noticable difference.


Also installed this on the wife's Jeep.

 

I removed the seat back and the seat itself and wrapped it around the side. Cut a small hole to put the bolt back through.

 

For about 0.6 seconds I thought I might be looking at a fender mount antenna for the Tacoma.

Jeep.

 

got me a couple installed as well

 

Trip A: oil 4000 miles
trip B: tires rotate and balance 5000 miles for me, but I like the air filter date..

 

Do the struts fit in existing holes? Or is this require some extra work?

 

You have to drill holes. Two in the lower bracket and another two in the upper one. Lots of how to videos on you tube. Just take your time and make sure you have a good riveter. The rivets need at least 4 squeezes ( in my case ), I only used a $15 riveter it helps if you have a fancy/professional riveter. They (Spiker Engg.) have an online instruction that you can watch too if you want.

 

Yup they can drive a forklift to the side of it to load it. The front folds down as well in case I need more room. I can fold all sides to 30° for wider loads or pull them all off to use it as a stage. Genius design.

 

Hell yeah Cancerslug! Wasn't expecting that on TW.

 

Hopefully you don't have to dig to replace a post. I did that last year on three of them and they kicked my ass. Thank God for Sika Postfix Mix in the Bag which was a life saver.

 

I wish I bought a little beefier trailer like yours. But my new little guy is working out great. Have about 400lbs in the bed and 1500lbs on the trailer (pavers are underneath the mulch). She was squatting a decent bit.

Building some side walls for it today.

What do you guys think? Sumo springs, leaf pack? Not really wanting air bags.

 

Congrats again brother! I am on here as well… but still learning how to use the forum!!

 

Smeared some trim restorer on my oem cover. Looks 10x better!

 

I suggest installing RoadMaster active suspension.

 

Sure. I guess it is part of the hinge assembly. On the opposite side facing inwards, there is a protruding tab that rubs on the cover as you open and close the seat back. I have it slightly stretched over the outside portion so the tab does not rub. Just looks a little loose though.

 

Yep, did that on the nails. Finished the back seat and headrests today. Will try the fronts tomorrow. Only issue I had with the back was trying to get the top seat belt opening of the cover stretched around the plastic insert on the seat. Took awhile. Anyway, I think they look nice.