Im sick of my 3" Spacer lift now...

Im sick of my 3" Spacer lift.

Let me specify:
I have an 09 PreRunner with 265/75R 16, non TSB Tacoma and the front end looks lower than the rear. So...

Now the question is:
Would my existing Tires/Rims look too small with a 6" lift?
or
Should I go with a 4" Camburg lift?

I know I should go jack the truck up and see how it looks with an extra 1" and 3" of lift. But I want to hear your 2 cents.

Any pics?

Thanks

 

Can't go wrong with the spindles. Won't mess with any of your geometry, and won't lower your ground clearance like the db.

 

x2

if i had a prerunner thats the route i would go besides LT, and if you want the extra 2" then just get some billies or other coilover for the extra height you want

 

265/75 would look horrible with a 6" lift.

Go with spindles and 285s.

 

nahhh im saying spindles and coilovers, that is fine, a lot of people do that

the reason its okay to use a spindle and coilover is because a spindle maintains stock geometry

 

I hated the 265's with a 3in nevermind a 6in.I m thinking about doing a 6 in and was woundering how 285s would look with that.

 

spindles are the ONLY way to lift a prerunner, IMO. fuck that drop bracket shit

 

Yeah I wish I didnt rush into a spacer lift.
After the spacer and the UCA I could have done it right and just gotten the Camburg Spindles. Oh well.

 

x3

 

31's with 6" lift. http://www.tacomaworld.com/forum/2nd-gen-tacomas/135618-what-31-tires-look-like-6-lift.html. lol

 

Huh???? Jack stand lift. How much for that? What brand are they? Will my tires rub?

I dun know I kinda like the 6" with the 31's but I may go with the Camburg's. Just the hole geometry stuff makes more sense. Even with my UCA my tires are wearing out fast. Yes I have had the alignment triple checked.

Well thanks guys.

Keep the feed back coming thou.

 

31's with 6" will look like shit.....i got a levelin kit with 285/70's and got plenty of room, never rubs.....i am puttin a 3" body under it next week and will be rolling on 35's

 

get the camburgs and. Bilstien 5100. And set them at 1.75 or 2.5

 

^ Yes I believe I will take Kink's recommendation. Now I wish SDHQ would repeat their Black Friday Sale. It was like $150 off = $845. and less what ever I can get for the spacers. So i can afford this.

Thanks everyone.

Oh, any leads or if anyone wants to part with their spindle, please let me know.

 

Wait, why do I need the Bilsteins set to 1.75 or 2.5? Is it to make it leveled or to give it some more height?

 

Well if you set them at 1.75 then you will have 5.75 inches of lift up front,just to get more height, but with 265's I would set them at .85 for 4.85" of lift up front

 

Spindles FTW!