Pipe shield cushions for fuel door

Does anyone know what the part number is for the 2 cushions on the pipe shield for a 2015 Tacoma? The pictures are not very clear on this on the internet.

 

These?

 

Yes sir

 

I think this is it

https://toyotaparts.mcgeorgetoyota.com/oem-parts/toyota-cushion-lug-cmpt-panel-9054106059?c=az0x

 

Thanks for the input but these don’t fit the 2015

 

Weird?
Toyota says it does?

https://parts.toyota.com/a/Toyota_2...22609/FUEL-TANK--TUBE/674470-7751.html#77305A

 

That’s the issue I was having before putting this post, The 2nd Gen’s are smaller, this one is for the 1st Gen.

 

I got some rubber pad/plugs from Ace Hardware's bolt isle for mine as the OEM ones wouldn't stay put long term. Had to snip the tip and really force and twist them in place but they've been going strong for over a year now work better than OEM.

 

Oh, I’ll have to check out Ace tomorrow, thanks

 

Maybe this one?
https://www.toyotapartsdeal.com/oem/toyota~cushion~rear~door~panel~90084-54012.html?vin=&make=Toyota&model=Tacoma&year=2015&submodel=&extra1=&extra2=&filter=()

 

Those come up for the front door cushion, the dumbest part is the hardest to find.

 

No kidding. I never would have thought it would be this hard to find.

Ehh, I am impatient. I’d probably glue some vacuum line to it and trim to fit.
As long as it works? Right

 

Just call the dealer, why waste your time looking.

 

I would but the Toyota dealer by me , the parts department is horrible, they never answered the phone and always sell above list price. I have a few items I want just can’t find the part number for this item.

 

I found this if it helps. The fit confirmation disagrees with the title, but who knows: that's common. The lower one is missing on my truck. (2014)

1989-2020 Toyota Fuel Pocket Bumper - Toyota (90541-06059)

https://toyotaparts.bochtoyotasouth...989-2020-toyota-fuel-pocket-bumper-9054106059

 

OP says that one doesn’t fit.

 

I noted that too and on the website. The parts diagram only shows one part. (16) Tomorrow I'll try and swap the top one on mine to the bottom if it wants to come out easily without breaking.

 

This part # ^^^. Just bought some.

 

This is what the bumpers I got from Ace Hardware look like, had to use flush cutters to nip the long tip on the back and a little soapy water and pressure to work them in but they're not going anywhere where my original OEM's would just fall out it seems.

The OEM's also allowed the door to be "in" a little where these keep it perfectly flush with the bedside.

Top!