What Have You Done To Your 2nd Gen Tacoma Today?

No rubbing at all.

 

Finally got a chance to install a new pair of Osram bulbs for the ultimate headlight upgrade. Bye Bye to the craptastic Sylvania bulbs I had been dealing with for about 3 or 4 months. I even set a new person best time. It took less than 10 mins to install both from start to finish. Thinking maybe I should bye a lottery ticket.

 

It’s been confirmed.

 

What about chafing?

 

Is this picture, with the tire lifted?

 

Just drive in a straight line!

 

2.5” lift (5100 on stock 9 year old coils) in the front, some cutting of the lower plastic/metal flare, pinch weld beat to the outside, cab relocated and 1” body lift helped big time. Hoping in a couple of weeks I’ll have my coilovers installed, should be sitting a bit higher in the front.

 

Did you get your 5.29s yet? 33s and stock gears are bad enough.

 

Believe it or not, it’s not bad at all…not much different than my E rated 33’s lol. Rocking D’s now lol!

 

Got those KM3 big meat Larry Hoovers 35 come alive

 

Relocated the trailer power bracket so that it doesn’t hang down from the bumper. Modified a design by @TacoTuesday603 to work better on my ‘15 with larger tires and 3D printed with PETG.

 

Stripped the front down for new parts.

 

I did the same thing a few weeks back. Piss on them. It’s just dirt and washes down the drain.

 

Freaking dust boot popped off while installing lighter coils onto my old ome 9000s




Had to pry it away from the upper mounting flange this time

 

Hah I read that in that dudes voice
Love the color combo, wheels and paint match up nicely

 

Do you have a link for the orsam bulbs and what year truck did you put them on?

 

What size are your tires?

Absolutely positively going to rub.

Yep.

Lol

Not really bad at all, with 36's and stock gears and I proved it with a video.

A rear ring and pinion change is a fine tune with no HUGE difference as some have claimed unless the truck is towing something with considerable weight. The rear ring and pinion swap helped more with stopping than it helped gaining speed.

 

Currently running 285s, planning on moving up to 315s this fall.