What Have You Done To Your 2nd Gen Tacoma Today?

I bought them on Ebay but can't find them listed now. My truck is a 2015. All of the info on the swap can be found here:
https://www.tacomaworld.com/threads/the-ultimate-headlight-upgrade-h4-not-led-or-hid.398066/

 

Finally painted the chrome bumper. Scuffed it up for hours first. What a PITA. We’ll see how well it holds up

 

Murdered it out with black rims. Not thrilled but it was cheap

 

Wrap my hood and tailgate.

 

Driver side window went up and down, but didn't sound right, and hit "hard" on the up-stop (THUNK). Had an appointment tomorrow at the local glass shop for troubleshooting, but wanted to take a look first. Well - what do we have here? A missing bolt. Found it at the bottom of the door with a telescopic magnetic. All is good now. What a great feeling. Plus saved the $100 minimum charge at the glass shop.

 

Full interior cleaning & detail. Exterior wash & quick detail. Still need spring clay bar and wax.

 

Found it parked with three other Toyotas at home "May Day is Lei Day in Hawaii" at 0610 PDT. Aloha shirt day at First Presbyterian Church Coeur d'Alene on stage and in the tech space!

 

Not thrilled? Looks great!

 

Just a fresh car wash on a nice day

 

Thanks. My chrome rims were toast and $15 ea was too good to pass up

 

15$! Yeah way too good to pass up!

 

Went crazy with Plastidip, I coated all the badges and my grille. I used some gorilla double sided tape to secure the badges and it took forever to cut the stuff to the shape of the badges. This is the reason it’s light in the picture with everything laid out and dark when everything is back on the truck. My badges are also bent from being removed and put back on so many times so I might have to invest in new badges. The grille looks good from far away but up close its a nightmare because part of the plastidip peeled away when I took off my masking tape so I might take it off and redo it another time but for now I’m happy.

 

Did a little paint swapping while mall crawling at the Beer40... I trusted my backup camera a little too much and tapped a light pole with my rear bumper...

 

Installed a cat anti-theft shield / transfer skid plate from Talon’s Garage @Talon2006. Figure it’ll be a deterrent and a little peace of mind at least

 

Heads and URD headers installed… motor is apart to address low compression due to a leaking intake valve on cylinder #5

 

Mine is doing the same thing I guess I need to go in like you did and check it out.

 

You have a link to that?

 

Finished installing my new to me Icon RXT's. On option 1, truck definitely has some rake to it with an empty bed. Will get some pics tomorrow.

 

I love my Hitchgate Solo. When the Switch came out I was pissed because I thought I wanted the pitched tire mount, but the Solo allows me to open my RSI rear window without swinging out the spare. It also clears the tailgate when swung out to 90 degrees. It’s solid and doesn’t flop around when playing in wonkie terrain due to its torqued down pivot bolt. The right shackle attachment point had to go since this fits very close to the bumper. I have a Mobtown Offroad bumper with the hidden/recessed hitch like yours. Works perfectly.

I’ve also pulled a teardrop camper in that secondary 2” receiver. No problems. I had to have a 13” drop hitch though since it has now gone up four inches from stock and a 2.5” lift. The Frontrunner drop down table has also been extremely handy when truck camping.

Always look for WILCO’s discounted stuff. I got my swing out discounted but $200 as a scratch & debt sale item. Never found the scratch or dent.

 

Straight line driving until you get to cutting those nice fender wells! Looks badass!