3rd Gen OME Lift

Going to be getting this OME EK2301B1 kit

Components in this kit include:
Front Coil Springs (1 pair x 2886)
Leaf Springs (2 x CS047R)
Nitrocharger Sport Strut (2 x 90000)
Rear Nitrocharger Sport Shock (2 x 60091)
U Bolts (4 x OMEU53A)
Driveline Spacer Kit (1 x FK29)

In addition, will be doing a diff drop and SPC UCA's

Aside from the above, are there any suggestions or anything I am missing?

 

Price and availability is one big factor. Read a lot of positive posts and videos about OME as well. Sure there were negative posts as well like sagging and etc but looks like OME has updated their parts and from what I've seen it has been pretty positive.

 

Skip the diff drop maybe ? Trim packer? Are you doing the ECGS ?

 

I have the same kit. I didn't get a spacer. the 886x gave me too much lift but I have no bumper. switching to 887. If you don't care about offroading it will probably be fine. I have ecgs bearing as well

 

Was it really high on the front? I don't have my bumper yet and I don't want to be Carolina squatting

 

I got 3 inches