What Have You Done To Your 3rd Gen Today?

Be careful not to over-tighten the battery tie-down. It will squeeze some electric juice out because the OEM has an arch and mine did not.





When I replace the original battery, I will buy one without the tops so I can put a different hold-down on it.

 

Oe has some edges that are sketchy, easy to sand/grind. While the powertray sits higher in elevation due to bolt/bracket location, easier to place relays underneath.

 

Beautiful!

I mean, that's a great ceramic tint!!!

 

Went camping.

 

I second that remark!!

 

Slowly working on my patch game, very slowly

 

Gotta start somewhere

 

Put an OEM TRD Pro skid plate on my 2021 SR5. Next payday will be DD SS3 Amber/Yellow fogs

 

New wheels and tires.

17 x 8.5 Method 705s
285/75/17 Ridge Grapplers in C Load
3/4” Bora spacer

 

Finally finished removing all the stickers. Also used my old matte black touch up paint on the screws…will have to touch it up again after reinstalling. by

 

So what was your process? I just told the wife I needed to use her iron real soon. I don’t even know how to turn it on. She asked why and I said I think I will be working on my truck with it. She was puzzled and I never explained

 

You didn't ask me, but I just did this mod as well this weekend. I used a hair dryer on high heat. Worked very well for me.

 

I just put black decals over mine. 5+ years later, still holding up

 

First time I tried on the smaller ones I peeled it off then used googone and scrapped and scrubbed with blue scouring pad. It’s more work but safer (was hesitant to do this mod) than heat. Then I tried iron on the other ones and it works better and less clean up. Either way, just heat, peel and clean with googone. It’ll be less chance seeing residue.

 

Installed cement door handle covers from AJT.

 

Per the manual, the first oil change is 10K. Many people do a 1K or a 5K. I always follow the manual and I've never had a major issue on any car I have ever owned.

 

We enjoyed some Tube together…

 

My manual says every 5k or 6 months or 10k or 12 months whichever you reach first

 

Installed my Meso Customs v2 Ultimate map lights and dome light today too

 

Installed my Garmin Dash Cam Mini 2 with the Dongar dongle. Can't see it at all when you're sitting in the truck, and the dongle made the install a breeze.