Motorcycles BS Thread 2.0

We need to go Brushy Mtn Motor Sports Park before it gets too hot. I've never been but have heard great things about it.

 

Chipping away at the Yamaha wiring in small steps. I figured building a battery box and mounting it will determine where and how I’ll route the rest of the components and wires. So that what I did today. Still need the tie-down hardware and mounting tabs. I’ll do that once I settle on a location in the frame.

 

wonder if my mom would appreciate a 110 for mothers day..
gotta justify another purchase some how right?

 

Anyone recommend a tire pressure guage that fits in tight places? The rim is so small and the rotor so big on my new Tracer 9 that I can't get one in there. I bought a right angled one today and it is still too long.

 

I use a right angle adapter and then a normal pressure gauge. I think I got a 2 pack on Amazon for like $7 and keep one with each of my gauges.

 

First tire change have 90 degree valve stems installed

 

That's my plan. I'm buying a set of 45 and 90 degree extenders just for checking (won't leave them on) and will swap the front stem for a 90 degree later on. The rear is fine. Just that front one is almost behind the rotor and between two tight spokes.

 

I just use the normal pen sized mechanical gauges.

 

I know your pain. Yamaha FJR1300 front wheel with dual discs is a real bear to check until you swap out the valve stem. I would swap both just to keep them the same but that's up to you.

 

well I guess with bone stock suspension no extended cables needed
she works like a charm now
pretty sure after I add some HD springs front and rear though she will be too tight at full lock

 

Started working on the track today. KTM fired right up and I ripped it around a little bit. Backyard is way too small for a full size bike but I have a lot of logs that I can use to setup a trials course.

 

dont you just love looking at it! looking real nice bud
i sit and look at my small ruts back there and just laugh in sadness that my neighbors do not care to partake in the action

nobody likes to play

 

Ain’t that the truth!

 

I am trying to convince my coworker to get a mini bike because he has 2 acres. Then we can each have our own track.

 

Hell, I've found that even among riders, there are quite a few that aren't really "into it" or don't know that much about it. I usually try to stop talking when I see their eyes glaze over and they start staring anywhere but at me...

 

I have one of these, it works well

$20 Accu-Gage RRA100X Professional Tire Pressure Gauge with Protective Rubber Guard, Right Angle Chuck, 100 PSI

https://www.amazon.com/Accu-Gage-RR...?dplnkId=cfee5fc7-4084-4b1d-b7ff-5d562477b847

next time you change tires instal these short armored valve stems.

 

just got this:
https://www.transcend-info.com/Products/No-1200

waiting for a bar mount clamp before i use it. Not a fan on helmet mounting one.

 

I’m curious to hear your thoughts on it after some use. I don’t like helmet mounted cameras either, but the problem I’ve heard from various places is that constant vibration tends to damage the image stabilizer on a lot of cameras, specifically phone cameras. So your pictures and videos have constant motion blur. I’d imagine its a problem with trying to cram such a delicate device in such a small package where the bulkier cameras like GoPros haven’t reported as much of an issue.

 

i have a few ideas on dampening options if its too bad. the clamp i bought is this:

$7 WIROJ BlueSunshine Universal 360-degree Rotating Bike Bicycle Handlebar Mount LED Flashlight Torch Mount Clamp Clip Holder Grip Bracket (Black)

https://smile.amazon.com/gp/product/B074VBWSX5?ie=UTF8

 

Ended up behind a school bus for a few minutes on my way to work this morning and 4 or 5 little kids seemed to get a kick out of my bike. Pointing and waving and what not. Not sure if they could hear, but I held my gears a little longer and revved it up for them haha. Made my morning.