What Have You Done To Your 3rd Gen Today?

Put some black silicone around the outside of the light. It's not waterproof. Ask me how I know.

 

Here is a picture

 

Placed an order for VLED's Aqua front and rear footwell lights. Backordered, but expected to ship May 25th.
Also ordered the rest of my audio stuff from Crutchfield. Kicker Key 200.4, Focal RCX-165, metra adapters, ect. Pictures soon. Just waiting on parts now...

 

I should've done that today too. They're sitting in the garage with some JDM ASTAR led brake bulbs and reverse bulbs.

Go Bruins. It's win or stay home tonight....lol

 

Is this the guy that was banging outside of the club on that tictok?

 

What’s the reason for the painters tape?

 

I filled up at local station. $4.49.999

 

Highlighted my vital fluids and viscosities in owners manual.

 

Between $4.60-$5.30 here in AZ.

 

Trimmed my fender liners to fit my 285/70/17 wild peaks today

Mounted my Dobinsons suspension and tires this weekend

 

Yea I wish we were paying $4.49 a gallon here in Nor Cal. It’s $6.13 a gallon right now here..sucks!

 

‘POST UP YOUR OVERLANDING SETUP’

 

Be really nice to have one of those on my morning commute!

 

Can't cut it much closer than that since you only had 0.098 gallons left in tank?

 

Is a permit required?

 

“License to kill”

 

Definitely not in my state.

 

And, what, can you bring down with one of those? Are the shells reloadable?

 

Funny the third brake light has a recall, because of leakage? Why was it not seal correctly?
My leer camper is in the way, too hard for me to removed camper top, for dealer to replace with recall light replacement?

As you know campers use a two way tape, and leers camper top ,does not fit very well on Tacoma beds, the front of leer campers is more universal design, had to reseal a couple of times with out removing camper top.

Even the way the camper is screw to the bed? Not a good design for off roads, 4 - 1/4 bolt’s? Comes loose all the time. I like the old style camps and I will use six of them. Just remember I should get those self locking nuts!