What Have You Done To Your 3rd Gen Today?

Thank you sir I love it

 

It was triple digits for me a few weeks back. I'll remember to take a picture next time. It is also sad that the cheapest station next to me caps you at $75.

 

Looks great. What wheels are those?

 

Installed Radium Engineering's Dual Catch Can PCV & CCV Oil Separator System.

 

Yep, these for the front doors and dash. Focal RCX-165 for the rear doors.
https://www.cdtaudio.com/main_series/wideband/wb_systems/wideband4d.php

https://www.tacomaworld.com/threads/cdt-audio-for-2nd-gen.756638/page-2#post-27282465
Going to order my deadening through soundskins website as they offer a 10% coupon. That's the last piece of the puzzle I think.
https://www.secondskinaudio.com/sound-deadening/damplifier-pro

 

Thanks! They are the summit offroad apex's

 

.
I cant make up my mind.

 

I thought you had replied to my thread earlier haha.. Thanks for the info!

 

If we're talking EOTWAWKI, mount a MK19. Get a buddy on it and go to town!

 

We are practically the highest in N America $2.27 @ litre, so basically equal to $8.20 a US gallon

 

Please include the link so we can place an order.

 

On a ferry to the Orkney islands of Scotland!



Sharp eyes will notice that recently we've been averaging 15.0 mpg on the non-interstate roads of the Scottish Highlands, but gas (petrol as it's called here) is a bit over $8 USD per gallon.

We just posted our write-up of our three week, 1,500 drive around the Irish coast if interested at www roguewanderers.com

 

TSS Sensor
Hello,
Can anyone make some suggestions as to what I can do to stop the sensor warning from appearing on my dash, it was fine for about 3 weeks after I changed my grille to the TRD Pro Grille, now every time it rains or mists outside the sensor warning comes up on the dash, is there anything I can do to water proof the sensor itself?

Also being pelted with bugs it goes on. can i put silicone above the sensor plate or should there be no silicone there?

Please advise.
Thanks

 

Maybe try reseating the sensor? Sounds like it’s slightly off so it goes off all the time

 

Try this:

 

How do you reset the sensor?

 

Would it be possible to cover the sensor from inside the hood area with the recall fix that toyota did a few years ago? it was like a foam cover or a gasket to seal out the moisture. wonder if i could make one with a some gasket material and a sealant or double sided tape.

 

Thanks for the details. There is a dream to own a camper in my future.