Shop Time w/T.W. Friends

RE: Poll
I put weekly, but it's more like twice a week. If I shave too much I get ingrown hairs and they're a bitch to get out.

 

Ruger Mini-30 on FB about an hour from here. I asked about the price, must be high. No one likes my offers usually, because they’re on the super low tow it home in boxes type offer.

 

https://www.langmuirsystems.com/mr1?gclid=EAIaIQobChMI4KnRlKjd9wIVlIjICh3YXQpwEAQYASABEgImmPD_BwE
I priced one out with all the bells and whistles and a full set of tooling... $8700
Blows 'Hobby' out of the water for me.

EDIT: If you make them build it, it costs closer to 10k before shipping. ~$9700

 

I've never owned one but rumors say the AR is much more accurate.

 

Have fun Hunter, have a great weekend too

 

The only time I ever shaved was when I needed to perhaps wear emergency breathing apparatus !!

Most times I had the Sonny Crocket look in school

 

Sand started coming out again when I mounted the extinguisher bracket

 

I've seen brass and copper construction type for less than $450 that's for sure. I've had the water pump replaced 2x and the first time water pump had the thermostat replaced along with serpentine belt and idler, tensioner.
I'm have tempted to go through everything again but do it myself this time around.

 

Had to tap a 3/4” NPT hole before I left work, I knew it would fit in the big tap handle somehow. It was too wide turned the right way.

 

I guess it comes down to the person pulling the trigger !

My Mini-14 was way more accurate then any of the other semi autos I owned Though I did have a Chance to use A tricked out M-14 that could really reach out.

Wooden stock with the 6x18 from the bench 1" groups at 100 yards all day long.

 

How did it Work turned that way??

 

Worked good, only had one hole to tap.

 

the fish in your pfp @six5crèéd looks like tiddies and now I can't unsee it.

 

it totally does!

 

bunch of preverts....I like it

 

They did 24hr belts retention and run vibes on that fan-shaft today. Perfect.
I was going to mention to @tirediron that something else I noticed by turning that shaft between centers is that the diameter held more true for the entire length. This way between centers I basically turned it halfway then flipped it the other way. I really have no good explanation but feel like it worked out better this way.

 

Conversation between my wife and I this morning. She did amazing

 

Safe travels & enjoy the time away