TRUXEDO PRO X15 - Anyone?

It arrived yesterday. Got it installed. Pretty simple install really. It took me some time to figure out why the tension adjust wouldn’t work at first though. Turns out those clamps that hold the tonneau on to the front of the bed rails... they’re no joke! I was perplexed for a while, and even readjusted my rails, before I figure out those clamps hold it down so tight you may have to force the thing back a bit into those tensioners, otherwise it won’t come back far enough to latch down! I struggled with that for a good half hour before getting it to work. Dang though, it’s a nice cover! Looks awesome and is built really well. Definitely a winner.

 

Forgot to add a pic of the finished product! I may still do a little tweaking to the rails to get it perfect. I also think the slight wrinkles may go away as it sits in the sun and weather over time. Not sure though. It’s sweet though...

 

Looking to buy one of these . How are everyones cover holding up?

 

Mine was doing great but I had an unfortunate experience with a sudden ice storm vs bringing some things back from Lowes....and I (all on me) cracked the cover.

I can say that customer service was great and the replacement fabric was only around $150. It was doing great before my incident but that is a cheap fix for the fabric IMHO.

Get ya one!

 

Thanks for the feedback. My current tonneau is falling apart after 2 1/2 years and there’s no warranty on it. Looking for something better. I really like the bak x4s but not for 1k

 

I've had the Truxedo Sentry CT (their version of the x4s) for 2 1/2 years and it still looks almost new. The convertible top fabric, which was the main reason why I chose the Truxedo, has held up nicely. I know the x15 and Sentry are almost the same from parts and install stand point, they use the same side rails, so I would have no problem with x15 if I had gone that route.