What Chainsaw do you run?

? Please read the original post…-10 C or -10 F


-10 F is significantly colder then -10 C.

 

? Why change my actual quote ?

 

Agree….but, an E chain saw is not run continuously like an E blower or E trimmer or even a gas powered chain saw which often is left running between cuts. Plus, I find the E saw has max torque as it begins where the gas saw has to be revved near max hp rating before you can even start the cut. In my experience, E saws are just as fast and less prone to jamming. IMO, it’s not where it will ultimately be but the potential like all electric motors vs gas, is much greater.

 

I agree with the continuous running part, which may keep the battery warm I think you’re suggesting? But that would just run down the battery that much quicker.

the potential for electric (battery) chainsaws is there, however it in no way shape or form is anywhere remotely close to the performance of a comparable gas powered professional chainsaw. I use saws regularly being a forest ranger (technician) and my opinion matches that of everyone in the industry, however I do own 2 li ion saws, they have their place that’s for sure.

 

Nevermind, apparently my joke didn't land. And I didn't change your quote

 

I have run a number of chainsaws.
Craftsman, McCulloch, Stihl, Johnsered, Husky and JohnDeere.

The older, heavier models typically lasted about 50-200 cords. The Electric/Battery models lasted about 5-20 cords. Most of the safety controls eventually break and need to be overrode to extend the life.

More recent models suffer from cheaply made sprockets, chain bars, chains, bolts, housings and engines. I expect 50 cords.

 

Only 50-200 cords? Must be doing something wrong maintenance wise.

 

I was thinking the exact same thing. No way a professional saw only lasts 50 cords….

 

Ego 14'' Chain saw..

 

Maybe the chain only lasts 50 cords

 

You need to sharpen your chain more.

 

I "sharpen my chain" plenty often don't you worry. My saws also last more than 50 cords.

 

I think we’re comparing chain saw use for home with professional use . I cleared 2 acres for our home with gas powered Husky’s. We Cut firewood for decades in the most heavily wooded state in the country, Maine. . The isolation demanded the use of ICE motors like it did with most profession tools. I now use a battery electric for blow downs and even used a corded electric for cutting wood near my home. The electric motor has no match in the ICE world. It’s just about the power source and energy density of gasoline carried away from a power source.

As far as temps are concerned, it has NEVER been an issue for emergency and home use. Who voluntarily cuts firewood in sub zero weather ?

 

Exactly. Keeping you chain sharp is as important to a saws longevity as maintenance is to an automobile.

 

The earlier E saws were built for home, not professional use. Newer Echo and Husky etc have the same running gear as their gas models. You get what you pay for. I think the variation in 50 to 200 cords tells you it’s more about maintenance and saw choice then it being electrified or not. E motors have absolutely no match in the internal combustion world. It’s just a matter of matching it up with an equal quality running gear. Buying brands like Echo, Husky, etc helps mitigate the problems.

 

I use a home Stihl 250 C (I think). It's the easy start model with a 18 inch bar. It's the best investment I ever made because it's easy to maintain, but mostly because I'm not wasting half my energy trying to start it! I use their premix fuel and I've never had to gently pull up on the cord more than 3 times for it to start. I always sharpen my chain after use and clear the weep holes for the oil. But as of late, I got a Dewalt electric saw that I've been using for small stuff that just needs a quick pull of the trigger to start. I have to admit that it works great. Again, I'm a homeowner type of user and I've cut down about 30 trees already around the property ranging from 6-20 inches in diameter. Probably 50 plus trees less than 5 inch.

 

One of the best things you can do is use True-fuel” and othe premixed non ethanol based fuels like aviation fuels. That’s all my lawnmower,snowblower, outboards and power tools see.

 

Honestly, I wish someone would've taught me that a long time ago. Glad I only have a couple things that need it now. The lawn mower is a diesel!

 

I learned the hard way. Additives for ethanol don’t work. Nothing works except using ethanol free gas. Hundreds spent on carb cleaning and replacing over time. Never have a fuel problem staying away from that shit. Im more careful with a diesel. Sludge can form in the bottom tanks that sit. I only pour diesel and don’t syphon anymore since I picked up sludge and clogged a filter in one of my Kubotas. Of course, I change the fuel filters yearly in the diesels. I don’t have a diesel chain saw.