fender flare gasket part numbers

Hello all,

Does anyone have part numbers for fender flare gaskets/moldings for DCSB 2022?

I am removing my flares and reinstalling them for PPF, and am coming up empty handed on the Toyota parts websites.

Thanks in advance!

Brett

 

https://parts.toyota.com/a/Toyota_2...L-AT/_65510_6725576/MOULDING/674470-7552.html
For 2020, but shouldn't be any different.

 

Thanks! Would you mind confirming I have everything I need? It looks like it takes 3 gaskets per wheel opening (is this right? I thought there would only be 1 per opening), with each gasket being used on the other side (mirror image). I do see 53851G/PN 538410400 listed as RIGHT but I don't see a left..is this an error?

Anyway this is what I found:



Thanks again for your help!

 

I believe it's just double sided tape so I'm not sure sides (left or right) matter. But maybe someone else can confirm that.

Front:

• 5385104100
• 5385504010
• 5385304070

Rear:

• 7569604050
• 7569704050
• 7569804030

 

Yeah, the gasket is just double sided tape. There are some plastic clips that the flares snap into as well that don’t hold quite as well after you pop one off, so OP you might want to get some of those too. I had to replace one of my flares and the double sided tape came already installed on the new flare, so not sure if they sell that separately. If so, I imagine it might be difficult to line up the tape to the flare and get it to follow the curve perfectly without some visible over or under hang.

OP, what’s “PPF”?

 

Thank you. PPF=Paint Protection Film a.k.a. clearbra.

Do you know what the P/Ns for the clips are? I saw a few. I will get 3 of each needed so I have a few extra. I bought new flares and had my friend paint them (I have an OR and like the painted flare look). He was in a hurry to put it together and used white double sided tape that he had laying around. The PPF shop is taking them off this time but I want to make sure they have everything they need to put it back together the right way.

 

When I pulled my fenders flares, more than half of the clips broke. Just figure you’ll have to buy them all and you’ll be ok. Once you see them you’ll understand why they break so easy.

 

I don’t know the part #s but it should be pretty quick and easy for the parts guy at your dealership to bring up the expanded diagram and pull the #s for you.

 

Resurrecting this post to ask if you purchased the flare gaskets listed? Did you get two of each for the front?

 

I did but it has been I dont remember what we used. I think the shop may hace ended up using a universal gasket. I. still have some left over