San Antonio

Good Morning SA! Today, we fix that missing nut under the resi mount. And put new bushings on the sway bar. And get that bumper mount "out of the way" in some fashion.

 

Good morning Kurt, sounds like a good day ahead!

Today we’re just touring around town with my parents, just an easy day.

 

You are a lucky guy to be doing so! Remember that!

 

Good morning folks! Lawn is mowed and complete for the first time in two weeks (no judgement). Now time to head to my son's last t-ball camp day. So far no coffee, I need to change that in the near future!

@Oldie2007 that sounds like a solid plan. I know that all the other coilovers that came with 650lbs springs measured in at 650lbs, 13" long, and 3" inside diameter. Hope that helps.

 

Have fun.
Have coffee.
And, I hope to entertain!

 

Here is the link to my build thread where I installed the 700lbs springs on my icons. You can see the difference in preload from the 650s to the 700s. I was almost at coil bind with the 650s.

https://www.tacomaworld.com/threads/slimwood-shadys-4runner-build.152599/page-7#post-4833842

 

Well, there's the "hard" part.


Naturally, the nutsert needs me to round out that hole just this " " much.

 

Afternoon Gents. Hope everyone is having a great weekend!

 

Thanks to everyone for your concern.
First of all, I'm doing OK. I was a bit shaken up though right after. For those of you that aren’t aware, I was robbed at the gas station this morning. After I stopped shaking, I called the Police. They responded quickly, and calmed me down because my heart was beating so fast! My money is gone. The police asked me if I knew who did it and I told them, “Yes, it was pump number 3”

 

It was! It still snuck up to 100* while I was lounging on the driveway, but.....

Bumper mounts chopped and painted up. Thanks @Tacotsubo & @MightyMouseTom - I have used this infrequently, but for everything I have - it was irreplaceable!




Got the nutsert installed where our nut had disappeared. And marked it since it's a different thread pitch.




And, got the new bushings on. Since I'm having the spring work done June 2, I didn't mess with any adjustments.





Too HOT for this stuff, but I'm done!

 

Well done....

 

Nice!

The used bushings can be reused, they help hold trash bags onto trash cans.

 

He got me last week.

 

He popped out from behind the dispenser and scared us so bad my fuel pump still has anxiety and won’t work.

 

And if it holds together, it will be here when the last sprinkler turns off!

 

We got some good rain last night for like 30 min. We needed it. Good morning folks. Hope you all have a great Sunday.

 

Good Morning Gents

 

Morning Linwood

Morning Kevin

Good Morning SA! When the last sprinkler timed out, and it was bed time, it looked like this (quite a light show);



Aaaaaaaaaaaaaaaaaaaaaaaaaaannnnnnnnnnnnnnnnnnnnnnnnnnd.....
0.25". So, I needed to water after all.

 

Morning crew

Just waiting in our hotel room waiting for storms to go by. Luckily we got a good day at the beach yesterday and did a little mini golf in the evening. Gonna grab some lunch at Water Street oyster bar then walk around the mall (kids choice) then head back home. Not the weekend we planned but made the best out of a unfortunate situation. Kids had fun, all that matters

You had me going

good job Kurt, you definitely deserved a cold brew after that

That's good, Hopefully we got some at our house, definitely need it

Y'all have a great Sunday, should be a little cooler today