2022 TRD Trail/Pro Replica Wheels Group Buy (Closed)

My wheels do not fit. The hub bore is too small. The hub bore is not painted and the dust cap is not near the hub bore (i.e., not interfering with fit). Have you looked at these wheels? Maybe I have an odd ball set? Americas Tire tried to tightened all the way in a star pattern to force them to sit flush and it did not work. They were afraid the studs would break. Please advise. I also left a voice message that has not been returned.

 

the irony that he's the only one bitching

 

LOL

 

Thought the same thing

 

Honestly, @Inferno! situation is the one that has me worrying

 

Yeah, me too. I'm sure it will work out. I will try and test fit the other wheels tonight. Interested to see if the rears fit different. I'm guessing the bore/hub is just super tight. I will see if I can clearance it somehow. The tire dealer told me to not bring the wheels back, bring others instead. LOL I like everything about these wheels, and they need to fit!

 

@Inferno! the look great on the other guys truck. I don't know that I would go clearancing it. I would let FSW fix that.

 

Coming from the guy who’s “worried” about shipping, lol. It’ll be ok, boo boo. Your wheels will make it to you unharmed eventually. Chill out. There’s no need to worry… I’ll still be here laughing at y’all, not bitching or worried, lol.

 

Dang, these are nice. Hope you all enjoy your new wheels!

 

Why are you here?

 

Entertainment and wheels, duhhhh... but mostly entertainment

 

Then you’re in the right place, we got it all

 

You're definitely entertaining

 

Just FYI.
Toyota makes and sells 2 different size TRD center caps.
Possibly the cause of all these issues???

Just throwing that out there. I don't have a dog in this fight. Just checking this thread out.

Good Luck!

Have a Great Day!!

 

Now to get another alignment and pray to the taco gods that they can align me so these 33's aren't rubbing on the cab mount.

 

Does anyone know the other pn for the bigger caps?

 

Well this is wonderful

 

Ok guys just got back from swapping the wheels out, my wifes cousin runs the local Les Schwab and has 20+ years with wheels/tires so I trust his judgement on the fitmet. He said cranking them down in a star pattern isn't a good idea as it could possibly cause issues with the wheel studs/dust caps for the amount we would need to crank. So we then removed one dust cap and ground it a bit but still didn't have enough clearance to pull them off/on for rotations. He then asked if I was ok with him grinding the paint off of the inner hub where the dust cap was binding, this isn't the hub bore so I said ok and still not enough clearance for rotations. We then ground down a little more then the paint removing a little bit of the wheel and they barely fit with enough room for on/off rotation removals. Now when I say enough room for on/off rotations that means having to wiggle them from the top and bottom a lot to get them to pull off the hub bore. Even after all this grinding it was still a very tight fit and after working on this with him for the past 2.5 hours I would agree with his statement the star pattern cranking the wheels on with the lugs shouldn't be done!

I'm not real happy I had to grind new wheels just to get them to fit, there is no reason the inner bore should be that tight on the dust caps! I will be reaching out to Dustin on this, sorry I didn't have better results guys as I know a lot of you are sweating this!!

I do like the wheels, they look great and are the perfect amount of poke with my 285's, here's a quick pic.

 

Those look great. Man, this sucks.

I'm not going to be happy with that tight of a fitment either. Suddenly I'm not nearly as excited as I should be about my purchase