Shop Time w/T.W. Friends

Looks good

 

Thanks, paint hides all my ugly welds

 

Wonder if they will be mounted to wall or sitting on the ground or blocks

 

On the wall, I drilled 3 holes on one long side. It's gonna be a lot of weight hanging from just one side with no support.

 

I don't see that ending well!

 

I bet the cages hold up though

 

Yep, they're going to be holding up the wall of the building they were attached to, after it collapses from their weight!

 

It was off the sprocket in the back too.

 

Oooppss… break, it run it off the drive end, and pull the <female dog> outta there... you're not fixing that on site!

 

I gotta wonder if that side track tensionor failed

 

Possibly - not familiar with those Case units; do the small ones like that use a grease-filled tensioner?

 

I think so it has been some time after they all blend together after years

 

I just watched a video of a guy working on a 450, I guess the 450C is the same. His tensioner was grease filled and the seal blew out so it wouldn't tighten up at all.

 

Well , survived the a/c install. My ass was dragging when I got done. Hard getting down on the ground anymore.

 

The getting back up is even worse!

 

I got to get down on my left knee for our dance, when we practice it kills me after 2-3 times. All them years of jumping out of mom and dads garage and kneeling down welding got me. Oh and a motorcycle wreck direct to the left one. I cringe when I see the kids do something and it affects their knees.

 

Just get a roller

 

Boss has been pretty good about it tho. He tells me to take a break. Hell, he can't find good help either.
I still get dizzy from time to time, but he was happy. He worked in the attic and I did the outdoor unit.