What Have You Done To Your 3rd Gen Today?

Thanks! I wrapped my emblem with some matte vinyl. If I remember correctly I bought the vinyl from Amazon.

The TRD grill badge is from @tacos4cheap I don't see them on his Etsy store anymore but you can message him and double check
https://www.etsy.com/shop/Tacos4cheap?ref=yr_purchases

 

I admire your move, and the excitement you must be feeling.!!!

Sounds like you're stepping into a big pile of excitement and adventure!!!

 

Guys, help. Replacing the e c g s bushing right now but I'm stuck on this dust cover should I use a chisel?

 

Got it. Okay it's been a while since I took one of these off I just drove straight down instead of at an angle and is separated the cap. I guess I'll be touching this up with a little black paint

 

https://youtube.com/shorts/RuCjtLLfDBY?feature=share

Did the Hector Salamanca dash mod today.

 

Take me with you? Good luck on your journey.

 

Picked up a bed mat from my local dealership today for $75.

 

Virginia plates on mine! (Virginia State Parks to be specific)

 

Got it today and back in the Taco world!!! It’s a 21 SR 2WD 2.7 SX package and I love it so far! Let the modding begin!!!

 

used to do truck stuff and picked up this bad boy

 

Changed oil, did the metal oil filter housing swap.

FYI the oil comes out this truck at the speed and force or Thor. Mine hit the pan, and shot straight on the driveway. Just be prepared. Lol

 

I'm sure the sound is still the same. I want to see what a week's worth of exhaust fumes look against that white paint job.

 

Installed Aqua front footwells, MESO puddle pods, DS18 tweeters and removed three flickering raptor lights I had in a terrible looking triforce. Everything works and the getting the wiring through the door while having the MESO V5s done before was a pain. Still, happy with everything! The tweeters are much better than stock and about 40 bucks cheaper than the Subaru tweeters. Still plug and play!

 

DIY Tonneau with divider for gas cans made from ladder pieces found in a dumpster. Light enough to carry without help, still need to close in around the side of the toolbox.

 

Better call Saul.
505-842-5662

 

Found excellent ecgs vid, sharing.

Sorry guys, I panicked a little. My fault.

Problem solved. Found a video

https://youtu.be/PnWEe19fWis

 

Today I added a safe dog restraint to my truck bed (2022). Used the two M6-1 threaded holes at the front of the truck bed and added two loops and two cables. This should be safe and last (too many reports of injured dogs from failed fabric restraints). Great for when the dog plays in the water at the local lake.

Parts (2 each):

• M6-1 x 25mm (1") screws (Can use Toyota 90148-A0006 screws)
• Tie-down Strap (
  $13 JCHL Tie Down Strap Rings Dirt Bike Stainless Steel Multi-Purpose Tie Down Anchor Strapping Hooks for Mounting in The Garage, Work Shop, Truck, Trailer, Golf Cart, Fence Black (10-Pack)
  JCHL Tie Down Strap Rings Dirt Bike Stainless Steel Multi-Purpose Tie Down Anchor Strapping Hooks for Mounting in The Garage, Work Shop, Truck, Trailer, Golf Cart, Fence Black (10-Pack) )
• Cable Leash: (
  $14 Leash Boss Dog Car Seat Belt Restraint - No-Chew Heavy Duty Car Seatbelt for Pets - 5 Sizes - Coated Steel Rope to Prevent Chewing (26 in) - Restraints for Dogs in Cars - Dog Seat Belt for Car
  Leash Boss Dog Car Seat Belt Restraint - No-Chew Heavy Duty Car Seatbelt for Pets - 5 Sizes - Coated Steel Rope to Prevent Chewing (26 in) )
• Rubber Bed liner is recommended for the dog's comfort

No Chrome version using a black carabiner:

 

First mod in the new truck. Completed a couple days ago but still haven't taken a finished photo of it

Added @oostroma's shift knob LED & Meso switches to my fake TRD knob, along with the latching relay kit.



Also finishing up a front end conversion on the old 2nd Gen before I sell it... putting it back to stock, as much as I can reasonably do at least.

 

Welcome and have a safe trip!