3.4 Turbo kit

Custom built 5vz-fe V6 turbo kit for 1st gen Tacoma and 3rd Gen 4runner.

-New Garrett T3 60-1, stage 5 exhaust wheel, aluminum backing plate, 360° thrust bearing.

-Tial 38mm wastegate

-Tial 50mm bov

-Custom Manifolds, cross over pipe, downpipe with recirculating wastegate dump

-All hot parts including turbine housing are freshly Bronze ceramic coated to keep heat in and protect metal

-New hardware

-New Gaskets (T3, oil drain, cross over, down pipe and to cylinder head but not pictured)

-New oil feed line

-New oil drain fittings/line

Oil drain weld bung for pan

-New couplers/clamps (90° & strait)

4" intake pipe

3" cold side charge pipe.

Lower down pipe has factory and wide band O2 port, clamp/slip fit to main down pipe. O2 plug included. Cut and weld to your existing exhaust. (Build 3" exhaust after cat).

-Aem Fic 6 piggy back computer. Wire directly to your harness or buy the patch adapter for your model from Urd. Control fuel and retard timing in boost area of map. Can control larger injectors. Switchable between 2 tunes.

-Laptop included with software already installed. Nothing fancy, works great.


This is a partial kit that is mostly complete with alot of leg work already done. You will need to complete intercooler/piping/filter. You will need upgraded fuel system with tuning! This Turbo is capable of over 60 lbs/min or 540whp. Ofcourse you don't need to run it that hard. 7-10psi would be good.

Located in Phoenix Az.
SOLD!

 

I want, can’t afford. I don’t know much about turbo but Great deal IMO just considering the custom American made and coated manifold.

 

Man if I had the money... Still haven't used those flanges you sold me tho lol

Bump!

 

You’re right down the way from me, wish I could pick this up but would not know the first thing about getting it tuned up correctly. I’m sure it would be fun though.

 

@Speedytech7

 

If this ad is still up when my big block sells I will 100% buy it

 

oof... that nice and tempting...

but damnit mr2 distractions prevent me from spending the money.

just do it @Speedytech7

 

Gonna negotiate the sale of my big block tomorrow, with any luck I'll be PMing Jon tomorrow evening

 

SOLD! SOLD! SOLD!