Looking for fog light bezels

I am looking for a set of fog light bezels. Does anyone have a pair they are looking to part with? I am installing fogs in my SR

Thanks

 

Where you located?

 

They are not very expensive new, some Toyota parts sites have them for 8 or 9 bucks, but shipping is usually 15 bucks or so

 

*Beeezels

 

Sorry, Charlotte NC

 

I've seen 2 different part numbers, not sure what the difference is.

There are these, which run about $36 a piece

• 52127-04020
• 52128-04020

and there are these

• PT353-35160-AA
  
• PT353-35160-AB

Which Ive found for around $10 a piece.

Both look like they will fit the Gen 3 Tacoma's.

 

I believe its the PT numbers that you need, I'm not sure what the difference is but they worked on my 2020 SR.

 

Which set? 52127-04020 & 52128-04020 or PT353-35160-AA & PT353-35160-AB?

 

Get Canadian Bezels, they’re cooler.

 

do you know the part number?

 

@vicali you just helped answer my question, it looks like 52127-04020 & 52128-04020 are the rounded bezels, like the Canadian ones and PT353-35160-AA & PT353-35160-AB are the squared off bezels. Thanks!

 

The squared off style bezel is the OR version (cheaper to buy), the angled version is SR5 which is the ones I bought which I like better. Either style will fit a third gen.
SR5 version fog bezels:
52127-04020 & 52128-04020

OR version fog bezels:
PT353-35160-AA & PT353-35160-AB

https://www.tacomaworld.com/threads/the-sr-thread-lets-see-them.411453/page-267#post-24136677

https://www.tacomaworld.com/threads/the-sr-thread-lets-see-them.411453/page-263#post-24026871

Scroll down this thread for more pictures and discussion of the bezels:
https://www.tacomaworld.com/threads/the-sr-thread-lets-see-them.411453/page-264

 

The squared off is the wide angle and “technically” the premium version of the 2. Not just or but sport too so essentially trd version (minus pro). I much preferred the lines of the sr5 though and how much extra light do you actually get being that lower corner isn’t dog eared anyways.

 

Will both work with the baja design squadron fogs? I prefer the SR5 version with the angle. My 2020 Pro rigid bezel follows the same lines of the SR5 bezel. I'm looking to replace my factory rigid LEDs and going to baja design squadrons. Guys usually go with the OR version for some reason.

 

I don’t know, you should ask Baja Designs. If you’re talking about the ones made for Toyota Tacoma I would think so since the openings of the two style bezels are the same, but best to ask them.

 

For anyone wondering. Either will work. I ordered the angled. Example from someone else.

 

Good choice. I have no idea why the oem angled bezels cost much more than the straight side bezels but I much prefer the angled so have them as well.