2nd gen console question

I need to replace that rubber/neoprene topper on a 09 access Cab. It's falling apart.
I searched everywhere & all I find is the whole console. I just need the rubber gray part. Anyone have a link to the part?

 

Like the piece that you lay your arm on?

 

#10 looks like what I think you are referring to. Unfortunately they don't list a part number. Easiest way I think you'll find one would be a junk yard.

 

#10 is it. I found the entire lid but it's $135 I just need the pad your elbow sits on.

 

You might be able to find a car upholstry shop that can do it for less? That or the junkyard.

 

That's plan B. Remove the rubber pad, add foam & upholster it.
Trying to find a non upholstery shop option.
Hard to believe no one has re-popped this yet.

 

Something like this...

https://www.ebay.com/itm/1340627869...XPIlMCTHS&var=&widget_ver=artemis&media=EMAIL

 

That's just a cover- I need the rubber fitted pad under it & for a 2009.

 

My vote is still junkyard and clean it up real nice. Should turn out...

 

I had a similar issue in an Acura TL I had a while ago. I pulled the cover off and cut up an old yoga mat to use as padding. Used staples to put the cover back on and it worked great!

 

Found it & it's available brand new.
Part number for the Toyota part is #58905-AD020-B0
Includes the rubber/neoprene topper, the shell under it & the latch.
Does not include the hinge
Price is around $118 for the new part. Ordered!

 

Hinge can be removed easy so that shouldn’t be an issue

 

Hinge is fine, just commented that part number didn't include a hinge. It does include a new latch though.

 

Just looked at eBay Motors and found three: Gray cover https://www.ebay.com/itm/223515540959?epid=1563357642
Black Cover: https://www.ebay.com/itm/172147985563?epid=724494976 This seller also has a camel tan cover listed.

Best wishes from another 2009 ACLB owner... (Who just found the registration and insurance organizer for the glovebox that I needed at eBay Motors...)

 

Those covers just stretch over the rubber/silicone covered lid. Not the same thing. Mine has a hole worn through it to the top shell & you would still feel the hole through that cover. I ordered the correct part which is the rubber/silicone top, the top shell, latch & bottom shell. The padded rubber/silicone top is not sold separate. I confirmed that with Toyota.

 

I have a busted latch in mine in case it’s compatible and you wanna sell stuff off. Hit me. I have some of the broken pieces I can take a photo of tomorrow.