Need new suspension

Recently my tacomas front end strut was replaced with the MasterPro strut assembly 32TY1101. However this left the front about 2in lower than it was before. What strut should I replace it with that way it's back to its original height?

 

Find a 3rd gen tacoma OffRoad set of take-offs, you will be extremely happy with the result! Look on the for sale forums and on FB Marketplace

 

Is there anything I could get brand new. Like after maket parts?

 

well sure, cost you more though...you can find take offs with little to no miles on them. I think mine had 10000 miles is all...sometimes you can find them new. Look around and see what you can find

 

https://www.tacomaworld.com/threads/fs-2019-takeoff-socal-suspension-skid-plate.767992/
3rd gen stock ones..they will fit but the Off Road will give you about an inch of lift in the front to "even" out the front and back RAKE of your truck

 

https://www.headstrongoffroad.com/s...)_-_BIL24-239370_for_05-15_Toyota_Tacoma.html

Should get you what you're looking for at a reasonable price.

 

3rd gen ORs

 

If you find a good off road pair please let me know

 

Pretty sure those preassembled struts are marked for the DS and PS. Are they correct? Monroe also makes "quick struts," but not sure if that would be an improvement.

Did you keep or have access to the old suspension struts? If so, you could just replace the shocks on the front struts. If not, 3rd gen take offs would be the best bet. Otherwise you're talking about some $$$ or about two tanks of fuel.

 

Unfortunately the mechanic got rid of the old ones
From what I gather they are pre-assembled? Is that a problem? Do you have any recommendations for a replacement to return it to its original height?

 

For the 3rd gen trd off road suspension. Would it lift up the front end?

 

yeah 3rd gen OR's will lift the front about an inch or so...made my truck level..not nose down anymore

 

Ok thank you so much. I think I found a good 3rd gen or pair on fb market

 

when you install them, they have colored dots, corresponding to drivers and passenger side...Good luck!

 

I'm not that mechanical capable lol. My mechanic should be able to do it though. Thanks again

 

Does this look like a good pair?

 

Look good! and just make sure you mention the color dots and driver vs passenger side. Not sure where you live, but people on these forums are pretty cool and may help you install them if you ask. I would if youre in Michigan.

 

Please stop calling them struts; call them coilovers

 

My 3rd gen take offs only had a 100 or so miles on them and the same guy I bought them off from is selling another set with only 10 miles on them.

 

I live in Texas. But I appreciate the offer. I got an offer on the front two struts for 200 dollars could you just tell me how those colored dots work. Like how do I know which one is for the drivers side and which is for the passagers?