Enkei RPT1

Looks great! Glad to hear there were no issues getting them mounted. Earlier in this exact thread it was stated that the new version(528) would not fit in 16 inch size due to the tapered bore for the center cap. You proved them wrong!

I'm guessing there's no rubbing even with the 'aggressive' offset due to keeping stock size and a sensible tire selection? Let us know if you get better MPGs- I'm betting you do!

 

Anyone here run the 17x9 version with stock tire size ? Not sure if it's "aggressive" or not...

 

Tirerack shipped them well-packaged using foam and cardboard to protect the wheel face, 0 scratch on the face, some light scratch on the inside but hardly matters.

I installed the wheels myself with hand-tools and thin-walled socket only, definitely not going to risk tire shop scratching the lug holes with their big impact wrench socket.

Tirerack didn't send me any hub rings, so I assumed the hub size matches the bore size. I have no problem seating the wheel square and flush against the rotor. There was a little play but after I verified all the conical lug nuts are hand twisted in there, the wheel stayed on it tight with 0 play.

right now I have to use the tirerack's lug nuts until my Muteki SR35 come, they only come in set of 20 so I have to buy 2 sets.

but yes, I can testify the new 528 16inch wheel needs no hub ring on 3rd gen Tacoma. I got to 80mph and smooth riding

and yes, no rub at full lock if you keep stock tire size, even when I have aftermarket mudflaps

 

Any Blazing blue pearl trucks with Titanium gold wheels?

 

I cant decide between the gold and gunmetal! Anybody got more pics on a super white?

 

Can't help you with a pic of a white truck, but the gunmetal color is super easy to keep clean. I rarely notice brake dust on mine.

 

It pains me to ask this.

Has anyone had any issues with the finish/paint on their RPT1s?
I have 2 spots on separate wheels that concerns me. It looks like the paint chipped off. I will try to get pictures of it later today. Pretty bummed.

 

The finish is fine on mine.

 

Might be the wrong place to ask, but if I get these in an 18" with a zero offset and run 275/65/18 tires, would there be any rubbing if I did a 2" lift up front and 1" in the rear?

 

Hey, do you have any pictures pf the new 18” versions with center cap?

 

mine didn't come with center caps and they haven't been mounted on the vehicle yet.

 

Well please share a pic either way when you get them mounted

 

Nice setup. Any rubbing with the more aggressive offset? And the sized up tires?

That’s the setup I’m wanting to run!

 

Zero rubbing, 265/75/16 is the perfect size for stock trucks. Also with these wheels you won’t have any power loss due to them being so light.

 

Thanks. I’m actually running those tires in that size already, glad to hear they still clear even with that offset.

 

Just got the 528 version and can confirm a perfect fit. The center caps fit on the rear but not on the front. Stock height, 265/75/16 Wildpeaks. I can’t Bellevue these are 7lbs lighter per wheel than stock offroad 16’s.

 

Did they discontinue the Titanium gold?

 

Anyone know where I can find a silver set? Having trouble finding that color.

 

I asked the same thing a while ago. Enkei makes it in Raptor fitment, but not in ours. Currently, Gunmetal only on Enkei's site for Tacoma.

 

So all im seeing on several site are the 108 bore. Where is everyone getting hub rings from? Sorry if i missed something. New to Tacomas and im a week into ownership lol.