Shop Time w/T.W. Friends

Well, whadaya know. We actually have some in the store I work at!

 

...

 

Ha Ha Ha!!

Now you sir have made my Morning It felt good to laugh so hard

 

Your better then most!!

I always needed to give my Condensing unit a good washing every spring it did not look dirty to my eyes but something was on there to prevent heat exchange !!

After the washing good to go.

 

I’ve never been in a Jon boat, only canoes or kayaks. Are Jon boats easier to flip over than a canoe?

 

No, they are actually pretty stable with the bottom being so flat

 

I guess I’m thinking those seats would cause a high center of gravity. I was taught at a young age to keep low in the canoe when moving around.

 

Then some people even manage to roll a Boston Whaler in a Pond.

 

I used to take the boat out with 2 yellow labs I had at the time and they would jump back and forth. It’s wobbly but never thought it was going to turn over. Also have had 3 people in it and it was stable as well.

 

Ask my wife to list the Jon boat, she said what do you want to say about it? I said let me see what I can come up with….


14’ Jon boat

It may look like a lifeboat from Noah’s Ark but let me tell you about this former bassmaster classic back up Jon boat from the 20th century…..

If this boat could talk it would tell you about the 10’s of thousands of fish that have been caught while in use, not to mention all the fish that were missed cause you were looking at its awesomeness instead of watching your cork.

With 3 seats that swivel it doesn’t matter where the fish are you can be on them in the matter of a twist, it’s not the boats fault if you can’t catch them. It gives you the option to be there in a jiffy.

At the turn of the 21st century it was refurbished with some high quality paint on the outside and a couple stainless steel patches. No leaks except for the missing plug…..

It has a place for a plug and it needs it to float. I can’t find it but they are available for purchase at the local Walmart or Amazon next day or two (3-5 if you share our driver) if you have prime.

It has a trolling motor but needs a switch or something. It worked like new when it was new but as you can see, it ain’t new but it is included.

It also sits upon an old tobacco trailer that is included. Neither the boat or trailer have a title. Tow at your own risk.

It’s been a fun boat but it’s time to let it go to a new owner. That could be you for the low price of $———

 

We can't give trailer and boats away up here with no paperwork...

That write up will offset the lack of buyers that need documentation.

It'll be gone in a day.

$250 OBO is what I'd toss it to the road at.

 

I'd buy it just because of your ad!

 

they are stable. We used to have one.

id list for at least $1100

 

Be sure to include that you have a friend that turns weed eaters into trolling motors.

 

I'm thinking list if for $650, take $600.

I gave $100 for the boat without seats. Got the trailer for free. Have caught a pile of fish with it behind my parents.

The only reason I'm thinking of selling it is because the ponds we fish now we don't need it and later on we'd like to get kayaks for all of us to fish out of. And it hasn't been in the water in 10+ years.

 

If you dont act excited about it, they wont be either.

These here trailor supports are sourced from the finest local pine trees. Cut them with my bear hands. Yes I said bear. Throw a weird number like 775 at it and when people start adding things up to get there they think they're missing something. Gotta get that 775 from it.

Thank ya Lord I'm officially a level II Scotts Safety Scba certified technician. Insanely hard test. Got an 88% and 80% was passing.

Now I'm looking for something to drag home.

 

Can you get a gas pump as carry on

Congratulations on your new certification

 

Boss man told me yesterday he’d leave me a hot job I needed to work on. He’s out of town today and Monday.

This is what I came in to. They want me to add some here, not do that and they want square corners inside the pockets. I said how do you do that with a round end mill

 

Have fun with that?