What Have You Done To Your 3rd Gen Today?

Yeah dont have any up there. I'm now officially out of switch spots. Had to use the phone charger switch location. That one and the BSM switch are now removed and sitting behind the center console.

 

New cap arrived this week long wait but happy with the cap overall

 

My Tacoma's Sunroof "exploded" for no apparent reason while driving 70MPH today.

So it's more of what "What did my Tacoma do to me today", type post.

 

This is common with sunroofs and Toyota sunroofs. Tends to happen when hitting higher speeds with the pressure. It's also more common at the beginning of summer when everything is expanding with the heat. Its happened on 3 of my moms toyotas.
I'm not sure how often you open yours but it's good to open them every now and then. I try to remember to open mine when temperature changes so the pressure and expansion can release from the glass.

 

finally joined AGM side

 

Yep, heat. Exactly why I opted out of the sunroof option on mine in AZ. That and the weather stripping dries out and they leak. Motors are expensive to replace too.

 

Drove through there a couple of years ago after riding the Dragons Tail then heading to Knoxville.

 

Now to wire it in. Don’t forget the tie down.
Don’t need no stinking passengers.

 

Installed fox 2.0 w/resi’s in the rear to go along with my 2.5 resi’s up front. Very happy with the changes so far. Also playing around with a frame mounted go-pro mount I scrubbed together, partially using ideas from this site. It’s great to be able to watch the suspension cycle in real time while sitting in the cab.

 

Curious, did you try applying a turn signal while you’re in reverse? That’s the only time my Total Tail Stage 1 would hyper flash.

Nate.

 

I can has?

 

Nope, I chickened out I had read about the reverse and turn signal hyperflash issue before I installed mine and chalked it up to the switchback bulb not liking both inputs at the same time. I tested every other combination of tail light functions and had no issues, so I'm just assuming if I turn the turn signal on while in reverse it will hyper flash. Honestly the only time I can see that combination occurring is when parallel parking on the street, and in the 13 months I've owned this truck I've done that once, so I'm ok with it.

 

I only speak english.

 

Anyway I've got a left hand side pivot hinge...
Just waiting for my welder buddy to help me fab one up. All this work for a drop down table basically haha

 

You could always relocate the ECT switch like I did to give up an extra spot in the front lower switch panel.

 

I don't understand the table. Just not a need for me. The extra gas and spare tire , thats the bonus.

 

I cook lunch like 3 times or more each week at work. Should free up a lot of space on the back end

 

Took a video with the insta 360 today on a nice easy trail

 

Bought a body armour sky ridge RTT locally for a super good deal (let's just say it was under $500) but it was missing 6 sliding brackets and the regular mounting brackets. I was able to source exactly 6 brackets from an internet friend an hour away and went and got those today and made my own steel brackets with 1/4" steel to mount it to the BillieBars

 

I've thought about it. Even though I plan on keeping the truck until it dies, I'm always hesitant to do anything that cant be undone.