Your unique mod on the 1st Gens

No. . High ambition, low motivation.

 

Hey, let me show you the laundry list of mods and parts pile i have for my old lincoln. no judgement here!

 

Same Boat,
Need to replace the head, but pulling the head I wanna pull the bumper, if I pull the bumper I remove the winch to put into my ranger, but I then don't to go without the winch in the taco so I had to get another, Then replacing the front coils need new coilovers and tophats. and the list goes on just for this truck alone.

 

where did you get this blacked out corner lights?

 

I got the same set on eBay.

 

Didn't get much visibility in the lighting sub-forum, but I plan to try this out. Seems unique.

https://www.tacomaworld.com/threads/rgb-led-gauge-cluster-lightstrip.770383/

 

Got another steering wheel done. This one with red stitching. I also have another with blue stitching done. Both are nice but slightly below the level of perfection I was shooting for. I would happily let either one go for $350
IMG_20220727_173122302_HDR by Jose, on Flickr
IMG_20220727_173142612_HDR by Jose, on Flickr
IMG_20220727_173205383_HDR by Jose, on Flickr

IMG_20220801_211803044_HDR by Jose, on Flickr
Disregard the silver marks, that's left over leather pen which I remove with a q-tip afterward.

 

I would say my camper shell roof rack and side ladder made from an old bunk bed I got for free is pretty unique...maybe not in a good way haha

 

That's actually a really good idea and looks like it works really well. Is it secured to the shell or the bed?

 

That actually looks like it was made for that lol! Good job!

 

Thanks! The ladder is secured to the camper shell with brackets that just slide between the bed rails and camper shell

 

I was talking about the rack itself, it's hard to tell if it is secured to the shell or goes doe to the bed rail in the front and back?

 

I once made a snowmobile ramp out of a bunk bed frame. Didn't look great but it got the job done.

 

Oh I see. The camper shell just had some simple rack in the front and back that the bunk bed racks are bolted to

 

I think you're down playing yourself. This is sick! Very creative, unique and purposeful--you might have to draw it up in CAD and distribute the drawings for a couple of bucks

 

Well thank ya! I like that idea except have no idea how to use CAD haha

 

You don't know how to use CAD? You got to be kidding me....









CAD = Cardboard Assisted Designed











@Kwikvette
@Yota X

 

Hahah I'm sure I'll be doing plenty of that if I ever get around to making a plate bumper

 

My unique mod is probably not unique but it is practical and I haven't seen it here. Since I know my truck is on its 3rd a/c blower motor at the very least I decided to modify the wires so if there are any future replacements needed won't have to keep cutting the trucks wiring shorter every time.

 

Here's an update on how my carbon fiber wheel is holding up against the sun and also some detail on two extra leather wrapped wheels that I did.
https://youtu.be/zQB9GnnAOQg