What Have You Done To Your 3rd Gen Today?

Is it hard to install the tailgate power lock ?

 

Unexciting but productive weekend:

• Manual trans fluid (Motorcraft)
• Rear axle fluid (85w-140 conventional)
• Oil & filter change (Super-Tech and Toyota)
• Debadged door “TACOMA” emblems (didn’t like the chrome and didn’t want black)
• 2-low harness & switch install

 

Trd skid plate, with talons catalytic protector plate.

 

How did you get those readout on the stereo?

 

The tailgate power lock is a pretty easy install. I’d say the hardest part was getting the included grommet to seat nicely in the hole under the passenger front seat. You can use some soapy water to ease it in. I just used force lol.

 

No, its pretty simple. The hardest part is getting the new 2 loom clamp to close which isnt really much of anything.

Just took a look and it seems like this video covers everything.

 

I found the routing of the wire along the bottom to be tedious, but not mentally difficult. The metal clips were just annoying

 

Plug and play, do it!

https://www.tacomaworld.com/threads...ote-tailgate-lock.704115/page-7#post-27440389

 

Dayum!
You may not want to hear this but it barely made it to 60 degrees here in western Washington today.
It's been a while since I was in Texas. June 23rd 1988 to be exact. Air Force basic training in San Antonio.

 

Finally got off my butt and installed my Viofo A129 Duo dash cam.
It's only been sitting in the box for just over a year.

 

Joying head unit with obd fusion app from Google Play store

 

this pic just looks weirdly photoshopped to me. i think it's the odd sun angle combined with the camera flash. reminds me of those dealers that pay a cut-rate editor to photoshop car pictures over their store logo...

also, your front drivers side tire looks low? or maybe it's just the grass

 

The tires don’t even look low, it looks like the truck was photoshopped onto the grass lol

No hate to the pic or poster, just looks funny.

 

Awesome update and beautiful dogs!

 

Look what came in the mail today

Fox 2.5 w/ Resi for the front


Deaver Stage 2 U402 leaf pack


Still going to be a couple weeks before the install since my Fox 2.5s for the rear are delayed and FedEx seems to have lost my AccuTune U-bolt flip kit

 

It's the missing shadow. I'm guessing he used the magic eraser on a Google pixel.

 

@mattgecko lights are still one of my favorite mods on my 2016.

 

Thanks to @WarFab Armor the taco got some functional bling with the new Tie Rod Sleeves. Have to mention these did not fit the Moog Tie rods as they get a little thicker vs the stock ones on the inner side closer to the rack. Needed to remove about 1/16 off the ID. Will have the video up soon.



Also changed the turn signal light sockets on the GX. The originals were toasted.

 

That grass is like a putting green

 

i did the same thing to my spare tire chain except i used a padlock rather than a mole d ring, to add more theft deterent.