Great White Taco build

Great! Do you actually use your aux? I don't think I even used it once lol

 

Never. And definitely not now, since I deleted it. Im going to sell the 09-11 lower dash, and leave that part in there

 

I've gotten down there with just pulling the HVAC cover when I had my taco. I replaced the cig lighter with a USB port and was able to do it without removing half the dash. I have scrawny hands though, ymmv

 

Tiny hands would be great. I'm trying to find a thread I saw where a guy used dental wires or something to pull the plugs. Pretty slick.

On my journey I saw this too.



And hears the write up I used when I pulled everything apart.

https://www.tacomaworld.com/threads...enter-console-clean-look-lots-of-pics.306779/

 

Im not sure how that would work. There are clips on the back of the plugs that keep them in

 

They looked like a wire plyer type tool. He came at it from the top and bottom, pushing down on the clips.

Check this video out. I've done similar but I dinged the vinyl up a bit, worth shot with the a/c on.

https://youtu.be/vJNFs1ZzAoE

 

Hey @fatfurious2, did you end up finishing cable management on your project? Any final pics?

 

I will get you some shortly. The cable management was just zip tying the loose wires together, so they don't look messy

 

Set the mood with lights. Nothing is sliding around anymore. I still plan on adding a monitor to see what im using/taking in. But its done for now

 

Nice and neat!

 

Not sure if you have to , but I think you should/ or suppose to tape that temp sensor to the battery.

 

Ahh yea, i will

 

@theolee
Wait, i had the white plugged in.

Anyways, decided to try to switch to the BLACK, and was able to get it with needle nose pliers and a few picks

got it! 09-11, or at least my 2010 has the black plug for a-trac.

 

Nice!

 

Truck pulls to the right when under medium brake pressure. Stuck caliper? I just replaced the caliper last year

 

Any shaking? Might be a warped rotor

 

No shaking. Slight grinding noise. I guess i need to just get all new calipers, rotors, brake lines, and pads. Then go from there

 

That should fix it

 

Almost sounds like the pad is worn down to nothing. I would pull the wheel and look to see if pads are about equal on both front tires. If not, i would just replace the pads.

 

Driver pad is fine. I pulled and reset the wheel today.

Also thinking the spacers probably locked everything in, and before I could see if passenger side is bad.

Once I get new tires in July, ill pull my spacers and then hopefully things work again. I thought @AR15xAR10 said the passenger side somehow doesn't get fluid or is a common issue