AZ Classifieds

Put the black pieces for each side of the frame back in - it'll help quite allot to keep muck out.

 

I've got stock UCA's from a 2017 Tacoma with about 10K miles on them in good shape, not sure if they fit a 2013 or not but you can have them if you want to pick them in Valley Farms (near Coolidge).

 

I'll look into that. The guy I bought the bumper from told me that he took them out to save weight, but I was never really a fan of the open tubes just sitting there. Thanks for the motivation to put them back in!

 

Digging up an old post, but was There a version of the plastic tubs without the little built in shelf there?

 

I've got brand new JBA's still in the foam/box.

 

If he doesn't jump on them I might.

 

Yup. It's in the Chandler dump now though.

 

I have some used Camburg UCAs that I pulled off because I got matching UCAs for my JDFab subframe. Been meaning to list them for sale but Ive been busy. The are a little dirty/beat up but in good shape. The uniballs have a tiny bit of play but I was running them without any issue. They dont move/make noise. I have 2 brand new uniball bolts that will go with. The bolts were extras I kept in the truck because I marred some threads on one bolt but theyve been holding just fine with blue loctite. Bushings are in fine shape, just greasy ha. New these are $750. 2 replacement uniballs are $114 from Camburg are $114. They definitely dont need replacing right away but will some day. Ill take $300.

 

Damn, too bad I don't need to upgrade mine!

 

I'll third that, I'm also looking for parts. I have some fortified take off leafs coming, a heavy bumper too. My truck needs some love before hunting season, rides like hell.

 

I could use these I sent you a PM

 

Looks like I won’t be able to use it so I have a 3060ti GPU for 400 and a 11th Gen Intel Core i7-11700KF for 300. Still new

 

Bump

 

For the locals;
$100 negotiable

 

Again local pricing
CVT MtHood Med Tan
$2200 Cash. (3695 new)

 

Gpu new?

 

Does anybody have a camper shell or softopper for sale? Doesn't matter the color, but for a short bed 2nd gen tacoma. Magnetic gray or black would be preferred. I would do $500 for a shell or $300 for a softopper. Obviously the quality doesn't have to be brand new. Thanks for hearing me out.

 

I have a Tan SoftTopper. But 300 aint even close

 

SoftTopper Tan Short bed
$700 Flagstaff

 

For Sale - 2001 Toyota Tacoma Xtra Cab 4x4

List of Modifications -
Snorkel, King Shocks, SPC Upper Control Arms, OME Dakar Leaf Springs, U-Bolt Flip Kit, Timbren Rear Bump Stops, Rock Sliders, Steel Front Bumper, Steel Skid Plates, DIY Pop-Up Camper, Larger Transmission Cooler, & 3rd Gen Tacoma Wheels w/265/75/17 Falken Wildpeak Tires.....

Recent Repairs in last 12 months - New Oem Lower Ball Joints, New CV Axles, New OEM Passenger Tie Rod, & New OEM Starter

Major Repairs 15 months ago - Low Milage (80k miles) Japanese Import Engine Assembly installed, w/all new seals, gaskets, timing belt, water pump, thermostat, spark plugs & more.

I have photos & videos of the engine replacement.

Asking $16k OR BEST OFFER....