What Have You Done To Your 3rd Gen Today?

I made that statement directly to my sales agent when I picked up my Taco. If they treat you well then you will tell people. If they don't, you will also tell people.

 

I don't see moving from JBA to SPC as a downgrade. They both can achieve the same outcome (high caster) with SPC giving more adjustability in the end, both caster and camber.

 

Black badges and ceramic coat right over its first pinstripes, ha

 

I'd really like to have that anytime front facing camera but am not handy and that looks intimidating to install. How hard was that to install?

 

I had a car do this when the battery was failing.
I was driving at cruise speed and out of the blue my needles stared swing back & forth full scale. Tach, Speedo, Fuel, Temp, Amps, & Oil Press. Freaked me out. Car continued to run without a hiccup and the needles returned to normal function. Occurred twice (different days). The battery was dead at the next start or two after the 2nd event.
The batt was 10 years old, so I didn't cus.
After I replaced the battery, the needles never went wonky again.

 

Scooted around town and finally hit 1500 miles 11 months after buying the thing..

 

Don't feel to bad I'm about to hit 24k after 5 yrs and it's my daily driver.

 

Just took delivery of my 22 TRD OR a week ago (TRD Lift and front Grille installed by dealer), got 200 miles on it so far.

Already knocked out:
- Bronze TRD wheels with some 4 runner tires I had down in the basement (Nitto Terra Grapplers).
- Picked up a Autel TPMS programmer to ODB program the sensors into the truck (no more trips to discount tire for me )
- Swapped tail lights for the night shade tacoma trim.
- Swapped out the chrome rear bumper inserts for black inserts.
- Swapped TRD Performance (black tip) exhaust for a Magna-Flow setup I had already.
- Swapped battery for AGM
- Swapped out the rear view for a Bob's Mirrors Rearview with HomeLink (2022 and still no garage door opener, really??)
- TRD Shift knob for my manual
- Swapped Steering wheel for $200 eBay special (Had same one on my 4Runner and loved it)
- Weather Tech Mats
- TRD Skid Plate

Next on the list is Corrosion Free Formula 3000, then onto new radio and speakers/amplifier, sound treatment etc...

 

I felt out this Michigan winter my first year here before destroying it. Pretty much has sat since October.. needed to get the gas out of it.

 

Changed my cabin air filter with the Fram True Air CV10285. Don't recommend this, it doesn't fit in our cabin air boxes well. I really had to bend and shove to get it in the box.

Need to remember not to buy this Fram filter again and try a different brand.

 

Just don't buy anything from Fram lmao.

 

why didnt you just return it for something else?

 

5160/6112 Icon AAL pack for a little over 2 inch lift. 275/75/17 Falken Wildpeak tires. Fuel Rebel Bronze 17 inch wheels. Haven't had the chance to take it off road yet.

 

Dealing with Walmart once was bad enough. I wasn't willing to drive that far (it's not close to where i live) and deal with that place again. Also, i already had everything out of my glove box.

 

order 2 OEM ones from Amazon or something. Keep one or two in stock at home. Also how much stuff do you have in your box for it to be a problem? lol

 

Why not just send it back and get the correct one?

 

I’ve had a good experience using the K&N cabin air filter…and by good meaning I can just rinse it off and stuff it back in fits OK but more importantly never have to buy the paper ones once a year.

 

According to the book in Walmart. This was the correct one.

Edit: Looks like the book was incorrect. The Fram website is saying CV10374 was the one I needed. I'll return it another day and get the correct one.

 

I'm in the process of moving and may not end up keeping my Tacoma.

Good suggestion, and I usually have OEM spares but didn't have any more for the cabin filter. Considering I may not be keeping my truck much longer I don't want a bunch of maintenance extras.

 

Again, this is a reflection of ---- Fram.

Pure crap.