North East CraigsList finds

I did see those, I'm not sure how I feel about the battery side being so chunky. Compared to the M12 at least.

 

Only $235 without the batteries, which chances are you already have.

$330 DEWALT DCF911P2 20V MAX* 1/2 in. Cordless Impact Wrench with Hog Ring Anvil Kit

https://www.amazon.com/gp/product/B09HW3MSV4?smid=A33JC3QY673I0A

 

Ah, that's the stubby one. Good find. I honestly might look into that since the big ass one Rob noted earlier sometimes has a hard time getting into places. Only downside is lower torque, although stuff shouldn't be stuck that bad, lol.

Then I'm starting to debate on getting a 3/8 one instead of 1/2, just for versatility. Then that brings me back to the question of, do I want the ratchets that @Roll_Terps mentioned...

 

But you only get 3 of them lol

 

Lol then you gotta buy that one for 600.

 

I got this one. I think its the good middleground between break every bolt impact and not enough torque. The little one couldn't even take off lug nuts so I returned it and got this one.

$202 DEWALT 20V MAX* XR Cordless Impact Wrench with Hog Ring Anvil, 1/2", Tool Only (DCF894HB)

https://www.amazon.com/DEWALT-DCF89...837&s=hi&sprefix=dcf894b,tools,92&sr=1-2&th=1

 

Decisions, decisions. If you can't decide, just buy them all.

 

Lol the Amazon description says 330 inch-lbs. Yeah, that might be good, but I can't justify it since I have the big ugga-dugga one.

That's the problem, I want to, but no money, lol. Gotta save up for the wedding.

 

register at HD and we can send you shitz

 

I don't see a need to register at Home Depot... Also why you sending me stuff? You need to save money for yourself.

 

I hope this doesn't turn out to be a "Ohhh dayyyummmm, that is a typo, it's suppose to be $1,400"

 

FTFY

 

Right on every point Brandon.

HELLO! Game changer! I bet 70 ft lbs would snap a zinc bolt just as easily as I did with a manual ratchet but at least I am off the damn ladder faster and not sweating as much during the process. There are some interesting comments below the report. I am going to get one of these before the impact gun since I already have one (air). I definitely use my ratchets more than the impact wrench, and yes, I do have an air ratchet too but is is only 40 lbs. max and let me tell ya, that is not a lot.

One of the comments on that page stated the same thing and the rebuttal was the grip isn't much larger in diameter. I have short sausage fingers so definitely a concern for me.

Great find Mark! I believe that's the one Randall used when he and Tyler did my lift way back on the Sport. The one I posted was the result of a "which impact gun is best" search as the top Dewalt.

"Shouldn't be" but are is usually the case with me since most of my shit is older. See and I feel the same way, Wouldn't a (stronger) 3/8" be more efficient than my 1/2" air that's supposed to have 800 ft lbs.

Each time I say this I wonder more about my compressor.

Damn! That's a great compromise! Not a bad price for a used one either.

I am sure that's what Lloyd @Subway4X4 did (does) (is doing) HAHAHAHAHA! I honestly think he has 3 or 4 of every single model tool they make. Don't you Lloyd?

 

All I can say about your compressor is check to make sure the regulator isn't off or something, but you probably have already troubleshot at some point.

 

No although I am adding this to the to do list now I suppose.

I do have a shit ton of hose hooked up to it, and my fittings suck ass. At the time of the lift install that wasn't the case though.

All the more reason to switch over to batt power everything. Including an air pump. I honestly use it more to clean things off with the air nozzle, including me, than for anything else.

 

Hmm, just be careful with battery powered air pump. I had an issue with my Dewalt one, although it was covered under the warranty period. The capacity is just too small for what I want to use. It's good for small duration stuff like filling tires or nail guns and whatnot, but for spraying (like fluidfilm/woolwax) it has nowhere near enough.

 

Sorry for the late response guys, I am going to have to hold off on buying/having you guys talk to the seller/actually picking up. Thank you guys so far, but I have already spent way too much on truck stuff this month (what's another $800 I am saying to myself...).

 

Love the m12s. Only complaint is they don't really have breaking torque. But breaker bar then them they do the job. Also watch your knuckles while tightening

 

Researching "what's making my compressor underpowered" now.