Front turn signal LED wiring harness?

TRD trim is different than SR / SR5 which uses a combined DRL / turn bulb. So not unexpected to have differences as the circuits are different.

 

The SR/SR5 does need slightly more resistance than the TRD models. I run 6Ω on mine with the VLED switchbacks, but the rears are halogen (That is all going to change soon! I swear!) I will pull a taillight tomorrow and see if I get hyperflash by disconnecting the rear turn signal. I suspect I will, but that is because in my experience messing with the front turn signals, the load isn't solely balanced side to side. but front to back as well. Trying to balance to load can be frustrating on these. But @cuser414 if you want a set of taps, shoot me a PM. I probably have some lying around anyway from the testing I've done.

 

Thanks. I am going to try the Meso tails with the VLED 15ohm resistors and see what result I get. It would be great if that's all I need to do