Alabama Mod Day July 9th and 10th

Damn, I didn't realize you had 33s. Any scrubbing when turning or hitting bumps? My new suspension should yield 2"-2.5" up front. Rear shocks should be a cinch to swap out.

 

None that I've noticed. I think the only "wheeling" has been the GA Traverse. I don't think I had them on last time I was in TN. I'll find out this weekend though

 

coils are set at 2.5.

 

How hard would it be to drop to 2” if I don’t like 2.5”?

 

My truck would be level then, but I like rake. I’m dead on 2.5” over stock in the rear.

 

Just have to disassemble coil with weight of truck and drop the clip on the shock body down a notch.

 

How many pound springs on the coilovers? 600?

 

I wanna say I’m at 2.5 inches of lift on my truck lol but I honestly forgot. I just started cutting until things fit how I wanted lol

 

good question, im not sure that would be my guess. Ill get a pic of it tonight. The guy asked me what vehicle and clip setting and such so i assume he wouldn't have put massive springs on there.

 

I’ve got spring compressors if we need to drop it any.

 

like wall mounted or sketchy clips lol?

 

Pfft

 

Don't get me wrong, I've definitely done some stupid shit.....but that one is too much for me

 

I’ve used these a good bit so far. They’re much better than the loaner tools and have bigger grips for truck coils. They don’t sketch me out at all.

KAKO Strut Spring Compressor...

KAKO Strut Spring Compressor Tool, Coil Spring Compressor Tool, Strut Spring Compressor, Ultra Rugged Coil Spring Compressor with Safety Guard and Carrying Case(2 Pcs)

https://www.amazon.com/dp/B08KCT1B5S?ref=ppx_pop_mob_ap_share

 

I have that same kit. I bought it when I bought my lift(never used them). I think it's somewhere in one of the rooms . I will bring those so you can get more on the spring if needed.

 

so sketchy clips lol. JK

 

Haha they aren’t bad for real. I’ve used them for a few swaps on the taco and once for the Ford. They can even wiggle in and take some load off to make preload adjustments with the shocks still on the truck. Done that a bunch haha

 

Clearing some more trails to ride on!

 

Dude, that’s awesome! You have a really nice place!