What Have You Done To Your 3rd Gen Today?

Thanks! Its a sweet setup, and ALWAYS gets compliments from dudes in 1-tons pulling their 5th wheels haha

 

nothing crazy it’s a RC 3in lift.

 

Our attic nets improve upon two main issues that customers have complained about with the other competition: items falling out and not enough space to be useful. Our nets span the entire back window length from side to side. Other products only attach at a very narrow point in the back and have angles that do not cover the entire ceiling area in the back. This both ensures your gear doesn't fall out and gives plenty of space to fit lots of gear. Personally, in the 1.5 years I've ran the net or some prototype variation of it, I've only had a big farmers hat blow out a couple times because all the windows were down and the wind picked it up and dropped it on the rear floor). We also only recommend light items be placed in the net, but I have seen customers push that weight limit WAY past what I would recommend, and with flying colors. I've seen a whole damn kitchen pantry of chips and dip up there, to multiple sleeping bags and blankets. The net material has a good amount of memory, so it does go back to its original shape after a few days of no use.

 

Which model Rockwood is this?!

 

Gussets + Dual Shear spindles went in this morning. Happy with the results.

Gussets + Dual Shear by Michael Rickerd, on Flickr

 

Its the Rockwood 282TESP

 

Drilled in drains for my Bakflip F1. Used a nice grommet to make it sexxxy:

 

Finally installed Unistrut in my cap. This is to hang camping gear inside, stiffen my cap, and help tighten down my ladder rack that came with the lowest quality lag bolts ever.

 

Thanks have meso push button on the way some method wheels. And runnin4tacos pro grill

 

One more service left under toyota care, coming up on 70k miles, crazy I bought this brand new in 2019 with the 75k Toyota care plan for 36k the one in the dealer ship is going for 50k, its the only truck on the lot and its sold.....

 

Installed the DD SS3 amber fog lights.

Next is the pro grill

 

Installed new fog lights today

 

Going to install my BD5 brake light this weekend as well. Don’t forget to silicone! Looks great. I’m gonna drill out the OEM light because I don’t feel like dropping the headliner.

* correction my KC5 light

 

Doing the exact same with mine this weekend!

All ready to go!

 

Nice. Can I see how you soldered the wires?

 

I am doing 3 whites and 2 reds. I made two sub harnesses. I will connect all 5 grounds to one ring and ground it to the body mount. I will then solder the two powers for the brake lights and the three powers for the spots into one wire each, mate it to the Meso connector and plug it in to the harness.

 

It actually Inferno. This color looks different depending on the light it's in, especially in pictures.

 

Yeah Im lazy and just pryed my stock one off. If Im mistaken, you have to totally wire up the bd lights or else they interfer with the key fob/unlock/locking system. KCs you dont, not entirely sure though.

 

Got rid of the ole 5 gallon barrel muffler finally, thing got kind of annoying all bashed up. Did a mbrp with a resonator, sounds perfect with no drone.

 

Looking good you have the prinsu?