What Have You Done To Your 3rd Gen Today?

Flag holder installed.

 

Mine came with the factory flag holder.

 

And a 9' factory lift it seems

 

Done alot so far complete kicker sound system with 12" square sub , decals, prinsu roof rack, light bar, head lights, tail lights, ditch lights, bed lights, K&N air filter, running boards, even a fishing pole holder . Love my setup.

 

Looks really good I’ve been thinking about doing something similar with mine…just not ready to pull the trigger on it.

 

Changed out my oil and differential fluid at 60k check. All good

 

We don't drive around with them blurred, so I always found it strange that folks blur their plates on this forum. Maybe if you're an asshole you should blur it?

 

Could you educate me on those tie rods?

 

Nice, did you fab that yourself, or is it a kit you bought? Doing a team event next month and I could use a good flag holder, but alas, my laziness wont allow me to make one myself.

 

OEM TRD Tailgate badge and Center Caps

 

Turned it into a road block at the Port Jervis Rail yard.

 

Diggin yours as well!

 

How many times has it had to come out?

 

It’s a pole from a long gone tent but would be easy to make with conduit or similar. I put M6-1 socket cap screws in the two holes at the front (for the factory tonneau cover or whatever) and wrapped wire around them to hold the pole up. At the bottom I slightly enlarged the center drain hole and poked the tiny tapered end of the pole through it.

The top would work the same for conduit and at the bottom you found tap a screw through a cap and put it through the drain hole before the conduit goes in.

 

Ecoological color matched bumper shells. Looks great, finally the last of the chrome is gone, and I didn’t accomplish any chrome deletion by replacing with black. I either deleted or color matched. I’m happy.

 

I like the looks of the center caps. can you provide the part # info and/or source? Thanks

 

Here ya go

https://toyotaparts.bochtoyotasouth.com/oem-parts/toyota-center-cap-trd-pt2803517002

 

I installed an ARB recovery point. Pretty straight forward but I would recommend getting someone to help lining up the internal frame bolt. It was fun by myself. My Eaton Detroit Tru Trac should be here within the week.